Sven Eckelmann <sven.eckelm...@open-mesh.com> writes:
> The QCA9887 stores its calibration data (board.bin) inside the EEPROM of
> the target. This has to be downloaded manually to allow the device to
> initialize correctly.
>
> Signed-off-by: Sven Eckelmann <sven.eckelm...@open-mesh.com>
[...]
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -18,6 +18,7 @@
> #include <linux/module.h>
> #include <linux/firmware.h>
> #include <linux/of.h>
> +#include <asm/byteorder.h>
>
> #include "core.h"
> #include "mac.h"
> @@ -550,6 +551,34 @@ out:
> return ret;
> }
>
> +static int ath10k_download_cal_eeprom(struct ath10k *ar)
> +{
> + size_t data_len;
> + void *data = NULL;
> + int ret;
> +
> + ret = ath10k_hif_fetch_target_board_data(ar, &data, &data_len);
> + if (ret) {
> + ath10k_warn(ar, "failed to read calibration data from EEPROM:
> %d\n",
> + ret);
> + goto out_free;
> + }
Looking at this again I noticed that we issue this warning even if
EEPROM is not supported, which I think is wrong. I fixed this in the
pending branch, the diff is below.
I also renamed target_board_data to cal_eeprom because, at least to my
understanding, the eeprom actually contains the real calibration data,
not the board data file.
Please review so that I didn't break anything.
https://git.kernel.org/cgit/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=4f79bdf2db7bcfa9c7c093fd423af801b9797c63
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index 10a1b620a68b..1e88251ca6d0 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -580,10 +580,11 @@ static int ath10k_download_cal_eeprom(struct ath10k *ar)
void *data = NULL;
int ret;
- ret = ath10k_hif_fetch_target_board_data(ar, &data, &data_len);
+ ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len);
if (ret) {
- ath10k_warn(ar, "failed to read calibration data from EEPROM:
%d\n",
- ret);
+ if (ret != -EOPNOTSUPP)
+ ath10k_warn(ar, "failed to read calibration data from
EEPROM: %d\n",
+ ret);
goto out_free;
}
diff --git a/drivers/net/wireless/ath/ath10k/hif.h
b/drivers/net/wireless/ath/ath10k/hif.h
index c18b8c81bde4..b2566b06e1e1 100644
--- a/drivers/net/wireless/ath/ath10k/hif.h
+++ b/drivers/net/wireless/ath/ath10k/hif.h
@@ -88,9 +88,9 @@ struct ath10k_hif_ops {
int (*suspend)(struct ath10k *ar);
int (*resume)(struct ath10k *ar);
- /* fetch board data from target eeprom */
- int (*fetch_target_board_data)(struct ath10k *ar, void **data,
- size_t *data_len);
+ /* fetch calibration data from target eeprom */
+ int (*fetch_cal_eeprom)(struct ath10k *ar, void **data,
+ size_t *data_len);
};
static inline int ath10k_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
@@ -206,14 +206,14 @@ static inline void ath10k_hif_write32(struct ath10k *ar,
ar->hif.ops->write32(ar, address, data);
}
-static inline int ath10k_hif_fetch_target_board_data(struct ath10k *ar,
- void **data,
- size_t *data_len)
+static inline int ath10k_hif_fetch_cal_eeprom(struct ath10k *ar,
+ void **data,
+ size_t *data_len)
{
- if (!ar->hif.ops->fetch_target_board_data)
+ if (!ar->hif.ops->fetch_cal_eeprom)
return -EOPNOTSUPP;
- return ar->hif.ops->fetch_target_board_data(ar, data, data_len);
+ return ar->hif.ops->fetch_cal_eeprom(ar, data, data_len);
}
#endif /* _HIF_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/pci.c
b/drivers/net/wireless/ath/ath10k/pci.c
index fb53f8846efd..f06dd3941bac 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2678,8 +2678,8 @@ static int ath10k_pci_read_eeprom(struct ath10k *ar, u16
addr, u8 *out)
return 0;
}
-static int ath10k_pci_fetch_target_board_data(struct ath10k *ar, void **data,
- size_t *data_len)
+static int ath10k_pci_hif_fetch_cal_eeprom(struct ath10k *ar, void **data,
+ size_t *data_len)
{
u8 *caldata = NULL;
size_t calsize, i;
@@ -2734,7 +2734,7 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
.suspend = ath10k_pci_hif_suspend,
.resume = ath10k_pci_hif_resume,
#endif
- .fetch_target_board_data = ath10k_pci_fetch_target_board_data,
+ .fetch_cal_eeprom = ath10k_pci_hif_fetch_cal_eeprom,
};
/*
--
Kalle Valo--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
