On Tue, Jun 21, 2016 at 09:09:10PM +0200, Johannes Berg wrote:
>
> > */
> > - changed = mesh_accept_plinks_update(sdata);
> > + if (sdata->u.mesh.user_mpm &&
> > + sta->mesh->plink_state == NL80211_PLINK_ESTAB)
> > + changed |= mesh_plink_dec_estab_count(sdata);
> > + changed |= mesh_accept_plinks_update(sdata);
> > if (!sdata->u.mesh.user_mpm) {
> > changed |= mesh_plink_deactivate(sta);
> > del_timer_sync(&sta->mesh->plink_timer);
> >
>
> Does it have to be done before the mesh_accept_plinks_update()?
>
> If not, you should put it with the existing u.mesh.user_mpm check. If
> yes, then the code is further buggy since only mesh_plink_deactivate()
> will call it when the kernel MPM is used.
Looks further buggy, so perhaps this untested patch would work, i.e.
move the accepting-plinks change closer to the decrement, and push
the user_mpm check down into mesh_plink_deactivate to just
avoid sending the peering frames. [There's also a bit there for
power saving that we likely want to keep for secure networks.]
Then again maybe accepting_plinks flag should just be computed when
used instead of tracking the state separately.
---
net/mac80211/mesh.c | 18 ++----------------
net/mac80211/mesh_plink.c | 16 ++++++++++++----
2 files changed, 14 insertions(+), 20 deletions(-)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 21b1fdf..3c150f8 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -148,22 +148,8 @@ u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data
*sdata)
void mesh_sta_cleanup(struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
- u32 changed;
-
- /*
- * maybe userspace handles peer allocation and peering, but in either
- * case the beacon is still generated by the kernel and we might need
- * an update.
- */
- changed = mesh_accept_plinks_update(sdata);
- if (!sdata->u.mesh.user_mpm) {
- changed |= mesh_plink_deactivate(sta);
- del_timer_sync(&sta->mesh->plink_timer);
- }
-
- /* make sure no readers can access nexthop sta from here on */
- mesh_path_flush_by_nexthop(sta);
- synchronize_net();
+ u32 changed = mesh_plink_deactivate(sta);
+ del_timer_sync(&sta->mesh->plink_timer);
if (changed)
ieee80211_mbss_info_change_notify(sdata, changed);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 79f2a0a..69ac7a8 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -349,6 +349,8 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta)
changed = mesh_plink_dec_estab_count(sdata);
sta->mesh->plink_state = NL80211_PLINK_BLOCKED;
+ changed |= mesh_accept_plinks_update(sdata);
+
ieee80211_mps_sta_status_update(sta);
changed |= ieee80211_mps_set_sta_local_pm(sta,
NL80211_MESH_POWER_UNKNOWN);
@@ -370,13 +372,19 @@ u32 mesh_plink_deactivate(struct sta_info *sta)
spin_lock_bh(&sta->mesh->plink_lock);
changed = __mesh_plink_deactivate(sta);
- sta->mesh->reason = WLAN_REASON_MESH_PEER_CANCELED;
- mesh_plink_frame_tx(sdata, sta, WLAN_SP_MESH_PEERING_CLOSE,
- sta->sta.addr, sta->mesh->llid, sta->mesh->plid,
- sta->mesh->reason);
+
+ if (sdata->u.mesh.user_mpm) {
+ sta->mesh->reason = WLAN_REASON_MESH_PEER_CANCELED;
+ mesh_plink_frame_tx(sdata, sta, WLAN_SP_MESH_PEERING_CLOSE,
+ sta->sta.addr, sta->mesh->llid,
sta->mesh->plid,
+ sta->mesh->reason);
+ }
spin_unlock_bh(&sta->mesh->plink_lock);
mesh_path_flush_by_nexthop(sta);
+ /* make sure no readers can access nexthop sta from here on */
+ synchronize_net();
+
return changed;
}
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
