if these sourcecodes would be just up to date with the binaries provided
by qca. but qca doesnt seem to care that much about it.
this is mainly also the reason why there are soo many long term
stability issues with no resolution
Am 29.07.2016 um 17:09 schrieb Ben Greear:
On 07/29/2016 07:52 AM, Benjamin Berg wrote:
On Mi, 2016-07-27 at 10:26 -0700, Ben Greear wrote:
On 07/27/2016 01:33 AM, Benjamin Berg wrote:
Unfortunately ath10k does not generally allow modifying the
coverage class
with the stock firmware and Qualcomm has so far refused to
implement this
feature so that it can be properly supported in ath10k. If we
however know
the registers that need to be modified for proper operation with a
higher
coverage class, then we can do these modifications from the driver.
This patch implements this hack for first generation cards which
are based
on a core that is similar to ath9k. The registers are modified in
place and
need to be re-written every time the firmware sets them. To achieve
this
the register status is verified after any event from the firmware.
The coverage class may not be modified temporarily right after the
card
re-initializes the registers. This is for example the case during
scanning.
A warning will be generated if the hack is not supported on the
card or
unexpected values are hit. There is no error reporting for userspace
applications though (this is a limitation in the mac80211 driver
interface).
Thanks to Sebastian Gottschall <s.gottsch...@dd-wrt.com> for
initially
working on a userspace support for this. This patch wouldn't have been
possible without this documentation.
I would be concerned about the various resets firmware does to work
around
hardware hangs as well. I don't think any events are generated for
these, unless
you count the dbglog messages?
Yeah, I am aware of the fact that the firmware may do internal resets
from time to time. The interesting question (and one for which I do not
know the answer) is whether we get a wmi or other event under all
conditions where the register may be rewritten due to a reset.
The current code will re-set the register value after any wmi event
including debug messages. If this is not enough, then the only solution
might be to periodically poll the register values instead of relying on
a received event.
You will get a dbglog event at least most of the time, so maybe that
will be good enough.
Someone with src code and that cared could audit the code I guess, but
then
that person could also just implement the feature properly in the
firmware
to begin with...
Thanks,
Ben
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Berliner Ring 101, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottsch...@dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
