$ iwconfig mlan0 essid MySSID
[ 36.930000] Path: /sbin/iwconfig
[ 36.930000] CPU: 0 PID: 203 Comm: iwconfig Not tainted 4.7.0 #2
[ 36.940000] task: 866f83a0 ti: 866a6000 task.ti: 866a6000
[ 36.940000]
[ECR ]: 0x00230400 => Misaligned r/w from 0x8677f403
[ 36.960000] [EFA ]: 0x8677f403
[ 36.960000] [BLINK ]: mwifiex_scan_networks+0x17a/0x198c [mwifiex]
[ 36.960000] [ERET ]: mwifiex_scan_networks+0x18a/0x198c [mwifiex]
[ 36.980000] [STAT32]: 0x00000206 : K E2 E1
[ 36.980000] BTA: 0x700736e2 SP: 0x866a7d0c FP: 0x5faddc84
[ 37.000000] LPS: 0x806a37ec LPE: 0x806a37fa LPC: 0x00000000
[ 37.000000] r00: 0x8677f401 r01: 0x8668aa08 r02: 0x00000001
r03: 0x00000000 r04: 0x8668b600 r05: 0x8677f406
r06: 0x8702b600 r07: 0x00000000 r08: 0x8702b600
r09: 0x00000000 r10: 0x870b3b00 r11: 0x00000000
r12: 0x00000000
[ 37.040000]
[ 37.040000] Stack Trace:
[ 37.040000] mwifiex_scan_networks+0x18a/0x198c [mwifiex]
Root cause:
mwifiex driver calls is_zero_ether_addr() against byte-aligned address:
drivers/net/wireless/marvell/mwifiex/fw.h:
struct mwifiex_scan_cmd_config {
/*
* BSS mode to be sent in the firmware command
*/
u8 bss_mode;
/* Specific BSSID used to filter scan results in the firmware */
u8 specific_bssid[ETH_ALEN];
...
} __packed;
drivers/net/wireless/marvell/mwifiex/scan.c:
mwifiex_config_scan(..., struct mwifiex_scan_cmd_config *scan_cfg_out, ...)
...
if (adapter->ext_scan &&
!is_zero_ether_addr(scan_cfg_out->specific_bssid)) {
...
}
Since firmware-related struct mwifiex_scan_cmd_config cannot be changed,
modify is_zero_ether_addr() to handle byte-aligned addresses.
Cc: Kalle Valo <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Amitkumar Karwar <[email protected]>
Signed-off-by: Petri Gynther <[email protected]>
---
include/linux/etherdevice.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 37ff4a6..0cfd243 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -90,11 +90,13 @@ static inline bool is_link_local_ether_addr(const u8 *addr)
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Return true if the address is all zeroes.
- *
- * Please note: addr must be aligned to u16.
*/
static inline bool is_zero_ether_addr(const u8 *addr)
{
+ if ((u32)addr & 0x1)
+ return (addr[0] | addr[1] | addr[2] | addr[3] | addr[4] |
+ addr[5]) == 0;
+
#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
return ((*(const u32 *)addr) | (*(const u16 *)(addr + 4))) == 0;
#else
--
2.8.0.rc3.226.g39d4020
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
