David Hutchison <dhutchi...@bluemesh.net> writes:

> I am using a Mikrotik hAP AC Lite which has a QCA9887 radio. It
> appears to be working; however ath10k ( or the qca9887 firmware ) is
> utilizing 15 - 20mb of memory. I applied the kfree(caldata) patch, to
> insure there is no memory leak.
> It doesn't appear to be leaking, and it will run Ok with the high
> memory footprint. However the Mikrotik hAP AC Lite is only a 64mb
> platform; so when I initialize the 2nd radio with ath9k I get OOMs.
> It just doesn't seem right that when ath10k + qca9887 is in AP mode
> that it's utilizing as much memory as it is. I don't think the issue
> is with ath10k, I think it's the qca9887 firmware (
> firmware-5.bin_10.2.4-1.0-00013 ).
> Is there a newer build available that may potentially fix these memory
> issues? The latest one available on
> https://github.com/kvalo/ath10k-firmware/blob/master/QCA9887/hw1.0/firmware-5.bin_10.2.4-1.0-00013
> is 2 months old. Perhaps there is a newer build to test that may have
> the fix?
> Any thoughts as to what it could be? I can provide more information if needed.

64MB of RAM nowadays is not much and ath10k is not really tested in such
setups AFAIK. I guess you could try if reducing TARGET_10X_NUM_MSDU_DESC
helps with the memory consumption, but no idea if that would even work
without further modifications to ath10k.

Also if you have fq-codel&co enabled that might increase memory
consumption. Adding linux-wireless as people there might have better

Kalle Valo

Reply via email to