Similarly to QCA6174, QCA9377 requires the CE5 configuration to be
available for other feature. Use the ath10k_pci_override_ce_config()
for it as well.
This is required for TF2.0 firmware. Previous FW revisions were
working fine without this patch.
Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c
b/drivers/net/wireless/ath/ath10k/pci.c
index 983f65bbb7fb..85367006a80a 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3132,7 +3132,7 @@ int ath10k_pci_setup_resource(struct ath10k *ar)
setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
(unsigned long)ar);
- if (QCA_REV_6174(ar))
+ if (QCA_REV_6174(ar) || QCA_REV_9377(ar))
ath10k_pci_override_ce_config(ar);
ret = ath10k_pci_alloc_pipes(ar);
--
2.1.2
