We have different modes of adjusting freq offset on different chips. Call current adjustment similarly like vendor driver - mode1 .
Signed-off-by: Stanislaw Gruszka <[email protected]> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index a6f3f78..65f20ca 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -1939,7 +1939,7 @@ static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, #define FREQ_OFFSET_BOUND 0x5f -static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) +static void rt2800_freq_cal_mode1(struct rt2x00_dev *rt2x00dev) { u8 freq_offset, prev_freq_offset; u8 rfcsr, prev_rfcsr; @@ -2415,7 +2415,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, } rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); if (conf_is_ht40(conf)) { txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, @@ -2605,7 +2605,7 @@ static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); if (rf->channel <= 14) { if (rf->channel == 6) @@ -2646,7 +2646,7 @@ static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev, else rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2); - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); @@ -2711,7 +2711,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); if (rf->channel <= 14) { int idx = rf->channel-1; @@ -3006,7 +3006,7 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev, } /* TODO proper frequency adjustment */ - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); /* TODO merge with others */ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); @@ -6454,7 +6454,7 @@ static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev) rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1); @@ -6680,7 +6680,7 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 2, 0x80); msleep(1); - rt2800_adjust_freq_offset(rt2x00dev); + rt2800_freq_cal_mode1(rt2x00dev); /* Enable DC filter */ if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) -- 1.7.1
