Larry Finger <[email protected]> wrote: > The firmware is read from disk as a little-endian byte string. The code > that loads the firmware into the device transfers it as 4-byte quantities. > The routines that write multi-byte quantities on BE hardware assume that > the data are in CPU order, and automatically do the conversion to the LE > order required by the device. As a result, the firmware is transmitted > incorrectly. Rather than do multiple byte swaps on the data, the download > routine is revised to transmit bytes rather than dwords. Although the > number of I/O operations is increased, the firmware is not often loaded. > > All drivers have the same bug, and use essentially the same code to > download firmware. These routines have been moved into rtlwifi. > > Some CamelCase variables have been renamed. > > Signed-off-by: Larry Finger <[email protected]> > Cc: Ping-Ke Shih <[email protected]>
Failed to apply: fatal: sha1 information is lacking or useless (drivers/net/wireless/realtek/rtlwifi/efuse.c). error: could not build fake ancestor Applying: rtlwifi: Download firmware as bytes rather than as dwords Patch failed at 0001 rtlwifi: Download firmware as bytes rather than as dwords The copy of the patch that failed is found in: .git/rebase-apply/patch 3 patches set to Changes Requested. 9506051 [1/3] rtlwifi: Download firmware as bytes rather than as dwords 9506053 [2/3] rtlwifi: rtl8192cu: Calculate descriptor checksum correctly for BE 9506055 [3/3] rtlwifi: rtl8192cu: Convert driver to use common macros -- https://patchwork.kernel.org/patch/9506051/ Documentation about submitting wireless patches and checking status from patchwork: https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
