On 02/10/2017 03:23 PM, Adrian Chadd wrote:
Is it limited on both tx and rx or only one?
Both, as I understand it. I think maybe we could use the max-tx-rate and max-rx-rate fields in the vht mcs info field to give user-space a clue. Thanks, Ben
Adrian On Feb 10, 2017 2:58 PM, "Ben Greear" <[email protected] <mailto:[email protected]>> wrote: So, it appears that the ath10k QCA9984 4x4 160Mhz chip can do 4x4 MIMO at VHT80, but it can do only 2x2 MIMO at VHT160/80+80. When configuring a peer, we need to tell the firmware the number of spatial streams of the peer at VHT160 and at VHT80 and lower. They are not the same value. I cannot think of any standard way to get this information based on VHT capabilities and such. Currently, one could just assume VHT160 NSS is 1/2 of the VHT80 NSS, but that is unlikely to be true for all vendors. Any ideas? Thanks, Ben -- Ben Greear <[email protected] <mailto:[email protected]>> Candela Technologies Inc http://www.candelatech.com
-- Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
