In brcmf_pcie_suspend() we inform the firmware on the device that it will enter in D3 state. Before this is done we already bring down the bus state. However, When entering D3 fails we abort the suspend and the bus state need to be restored.
Reviewed-by: Hante Meuleman <[email protected]> Reviewed-by: Pieter-Paul Giesberts <[email protected]> Reviewed-by: Franky Lin <[email protected]> Signed-off-by: Arend van Spriel <[email protected]> Change-Id: I837664ac9e06303b3a9596096f0f7c2bf7636b9a Reviewed-on: http://hnd-swgit.sj.broadcom.com:8080/8160 Reviewed-by: brcm80211 ci <[email protected]> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 6fae4cf..f36b96d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -1877,6 +1877,7 @@ static int brcmf_pcie_pm_enter_D3(struct device *dev) BRCMF_PCIE_MBDATA_TIMEOUT); if (!devinfo->mbdata_completed) { brcmf_err("Timeout on response for entering D3 substate\n"); + brcmf_bus_change_state(bus, BRCMF_BUS_UP); return -EIO; } -- 1.9.1
