When the trf7970a part has the bug related to 'en2-rf-quirk',
the GPIO connected to the EN2 pin will not be asserted by the
driver when powering up so it shouldn't be de-asserted when
powering down.

Signed-off-by: Mark Greer <[email protected]>
---
 drivers/nfc/trf7970a.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 2d1c8ca6e679..1a87525a88cd 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -1940,8 +1940,10 @@ static int trf7970a_power_down(struct trf7970a *trf)
        }
 
        gpio_set_value(trf->en_gpio, 0);
-       if (gpio_is_valid(trf->en2_gpio))
-               gpio_set_value(trf->en2_gpio, 0);
+
+       if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW))
+               if (gpio_is_valid(trf->en2_gpio))
+                       gpio_set_value(trf->en2_gpio, 0);
 
        ret = regulator_disable(trf->regulator);
        if (ret)
-- 
2.12.0

Reply via email to