I've applied patches 1-4 now.

The subject is a bit long - I was going to change it to

    mac80211: mesh: support sending wide bandwidth CSA
    
    To support HT and VHT channel switch announcements, both beacons
    and action frames must include the corresponding IEs.

but:

> +                2 + 2 + sizeof(struct
> ieee80211_wide_bw_chansw_ie) +
> +                2 + sizeof(struct ieee80211_sec_chan_offs_ie) +

The "2 + 2" should have a comment - no that I'm even really sure that
you need the wrapper?

> -             pos = skb_put(skb, 13);
> -             memset(pos, 0, 13);

Removing that is nice - but why do you do this:

> +             bool have_secondary_chan_offset = false;
> +             bool have_wide_bandwidth_cs = false;
> +             int ie_len = 2 + sizeof(struct
> ieee80211_channel_sw_ie) +
> +                          2 + sizeof(struct
> ieee80211_mesh_chansw_params_ie);
> +
> +             switch (csa->settings.chandef.width) {
> +             case NL80211_CHAN_WIDTH_80:
> +             case NL80211_CHAN_WIDTH_80P80:
> +             case NL80211_CHAN_WIDTH_160:
> +                     have_wide_bandwidth_cs = true;
> +                     ie_len += 2 + 2 +
> +                               sizeof(struct
> ieee80211_wide_bw_chansw_ie);
> +                     break;
> +             case NL80211_CHAN_WIDTH_40:
> +                     have_secondary_chan_offset = true;
> +                     ie_len += 2 + sizeof(struct
> ieee80211_sec_chan_offs_ie);
> +             default:
> +                     break;
> +             }
> +             pos = skb_put(skb, ie_len);
> +             memset(pos, 0, ie_len);

I think having multiple calls to skb_put() would be better.

>               *pos++ = WLAN_EID_CHANNEL_SWITCH;
>               *pos++ = 3;
>               *pos++ = 0x0;
> @@ -760,6 +781,28 @@ ieee80211_mesh_build_beacon(struct
> ieee80211_if_mesh *ifmsh)
>               pos += 2;
>               put_unaligned_le16(ifmsh->pre_value, pos);
>               pos += 2;
> +
> +             if (have_secondary_chan_offset) {
> +                     enum nl80211_channel_type ct;

You can have one here, and re-initialize pos.

> +                     *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET;
> /* EID */
> +                     *pos++ = 1;                              
>    /* len */
> +                     ct = cfg80211_get_chandef_type(&csa-
> >settings.chandef);
> +                     if (ct == NL80211_CHAN_HT40PLUS)
> +                             *pos++ =
> IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
> +                     else
> +                             *pos++ =
> IEEE80211_HT_PARAM_CHA_SEC_BELOW;
> +             }
> +
> +             if (have_wide_bandwidth_cs) {
> +                     struct cfg80211_chan_def *chandef;

and likewise here.

That'd also be safer in a way.

johannes

Reply via email to