Is there an enhanced or conflicting patch pending?
On 05/27/2017 10:56 AM, Michael Ney wrote:
The submitted code also doesn't appear to handle RSSI per-peer which would be
needed for any use when configured as an access point.
On May 27, 2017, at 12:39 PM, Adrian Chadd <[email protected]> wrote:
On 27 May 2017 at 09:07, Ben Greear <[email protected]> wrote:
At low encoding rates, especially if it switches to a single-chain encoding,
maybe the on-air signal really is stronger?
Have you verified in some other manner than the signals reported by ath10k
are
wrong?
Hiya,
So yeah, multipath, higher TX rates == weaker TX signal, TPC, etc are
all interesting to know about at the receiver. it's hard to separate
that out from the noise sometimes, but in some controlled deployments
its really obvious.
-adrian
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
The contents of this transmission are Ethertronics Inc. Confidential and may
contain proprietary or legally privileged information which may not be
disclosed, copied or distributed without the express written consent of
Ethertronics Inc. The information is intended to be for the use of the
individual or entity named on this transmission. If you are not the intended
recipient, be aware that any disclosure, copying, distribution or use of the
contents of this information is prohibited. If you have received this
transmission in error, please notify us by telephone immediately so that we can
arrange for the retrieval of the original documents at no cost to you.
Alternatively, notify the sender by replying to this transmission and delete
the message without disclosing it. Thank you
