From: Johannes Berg <johannes.b...@intel.com>
Fix many kernel-doc warnings. In one case, this required adding
a new enum value to be able to document things properly.
Signed-off-by: Johannes Berg <johannes.b...@intel.com>
Signed-off-by: Luca Coelho <luciano.coe...@intel.com>
---
.../net/wireless/intel/iwlwifi/mvm/fw-api-power.h | 35 ++++++++++++++--------
.../net/wireless/intel/iwlwifi/mvm/fw-api-tof.h | 16 ++++++----
drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h | 15 ++++++++--
3 files changed, 46 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h
b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h
index 0d88721b7b52..9d87fddd29b6 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h
@@ -82,6 +82,8 @@
* @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
* @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
* @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
+ * @LTR_CFG_FLAG_UPDATE_VALUES: update config values and short
+ * idle timeout
*/
enum iwl_ltr_config_flags {
LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
@@ -91,11 +93,14 @@ enum iwl_ltr_config_flags {
LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
+ LTR_CFG_FLAG_UPDATE_VALUES = BIT(7),
};
/**
* struct iwl_ltr_config_cmd_v1 - configures the LTR
* @flags: See &enum iwl_ltr_config_flags
+ * @static_long: static LTR Long register value.
+ * @static_short: static LTR Short register value.
*/
struct iwl_ltr_config_cmd_v1 {
__le32 flags;
@@ -108,10 +113,13 @@ struct iwl_ltr_config_cmd_v1 {
/**
* struct iwl_ltr_config_cmd - configures the LTR
* @flags: See &enum iwl_ltr_config_flags
- * @static_long:
- * @static_short:
- * @ltr_cfg_values:
- * @ltr_short_idle_timeout:
+ * @static_long: static LTR Long register value.
+ * @static_short: static LTR Short register value.
+ * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order:
+ * TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES
+ * is set.
+ * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if
+ * %LTR_CFG_FLAG_UPDATE_VALUES is set.
*/
struct iwl_ltr_config_cmd {
__le32 flags;
@@ -140,7 +148,7 @@ struct iwl_ltr_config_cmd {
* PBW Snoozing enabled
* @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
* @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
- * @POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
+ * @POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
* detection enablement
*/
enum iwl_power_flags {
@@ -166,6 +174,7 @@ enum iwl_power_flags {
* Minimum allowed:- 3 * DTIM. Keep alive period must be
* set regardless of power scheme or current power state.
* FW use this value also when PM is disabled.
+ * @debug_flags: debug flags
* @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to
* PSM transition - legacy PM
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to
@@ -191,7 +200,8 @@ struct iwl_powertable_cmd {
/**
* enum iwl_device_power_flags - masks for device power command flags
- * @DEVIC_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning
off
+ * @DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK:
+ * '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
*/
enum iwl_device_power_flags {
@@ -203,6 +213,7 @@ enum iwl_device_power_flags {
* DEVICE_POWER_CMD = 0x77 (command, has simple generic response)
*
* @flags: Power table command flags from &enum iwl_device_power_flags
+ * @reserved: reserved (padding)
*/
struct iwl_device_power_cmd {
/* PM_POWER_TABLE_CMD_API_S_VER_6 */
@@ -223,7 +234,6 @@ struct iwl_device_power_cmd {
* PSM transition - legacy PM
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to
* PSM transition - legacy PM
- * @sleep_interval: not in use
* @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag
* is set. For example, if it is required to skip over
* one DTIM, this value need to be set to 2 (DTIM periods).
@@ -233,7 +243,6 @@ struct iwl_device_power_cmd {
* PSM transition - uAPSD
* @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
* Default: 80dbm
- * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set
* @snooze_interval: Maximum time between attempts to retrieve buffered data
* from the AP [msec]
* @snooze_window: A window of time in which PBW snoozing insures that all
@@ -251,8 +260,9 @@ struct iwl_device_power_cmd {
* @heavy_rx_thld_packets: RX threshold measured in number of packets
* @heavy_tx_thld_percentage: TX threshold measured in load's percentage
* @heavy_rx_thld_percentage: RX threshold measured in load's percentage
- * @limited_ps_threshold:
-*/
+ * @limited_ps_threshold: (unused)
+ * @reserved: reserved (padding)
+ */
struct iwl_mac_power_cmd {
/* CONTEXT_DESC_API_T_VER_1 */
__le32 id_and_color;
@@ -343,6 +353,7 @@ struct iwl_dev_tx_power_cmd_v3 {
* @v3: version 3 of the command, embedded here for easier software handling
* @enable_ack_reduction: enable or disable close range ack TX power
* reduction.
+ * @reserved: reserved (padding)
*/
struct iwl_dev_tx_power_cmd {
/* v4 is just an extension of v3 - keep this here */
@@ -393,7 +404,6 @@ struct iwl_geo_tx_power_profiles_cmd {
/**
* struct iwl_beacon_filter_cmd
* REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
- * @id_and_color: MAC contex identifier
* @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
* to driver if delta in Energy values calculated for this and last
* passed beacon is greater than this threshold. Zero value means that
@@ -425,7 +435,8 @@ struct iwl_geo_tx_power_profiles_cmd {
* beacon filtering; beacons will not be forced to be sent to driver
* regardless of whether its temerature has been changed.
* @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
- * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed
+ * @bf_debug_flag: beacon filtering debug configuration
+ * @bf_escape_timer: Send beacons to to driver if no beacons were passed
* for a specific period of time. Units: Beacons.
* @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
* for a longer period of time then this escape-timeout. Units: Beacons.
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h
b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h
index 86aa51b2210e..eae036af880e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h
@@ -118,11 +118,17 @@ struct iwl_tof_config_cmd {
* @bandwidth: current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz
* @rate: current AP rate
* @ctrl_ch_position: coding of the control channel position relative to
- * the center frequency.
- * 40MHz 0 below center, 1 above center
- * 80MHz bits [0..1]: 0 the near 20MHz to the center,
- * 1 the far 20MHz to the center
- * bit[2] as above 40MHz
+ * the center frequency:
+ *
+ * 40 MHz
+ * 0 below center, 1 above center
+ *
+ * 80 MHz
+ * bits [0..1]
+ * * 0 the near 20MHz to the center,
+ * * 1 the far 20MHz to the center
+ * bit[2]
+ * as above 40MHz
* @ftm_per_burst: FTMs per Burst
* @ftm_resp_ts_avail: '0' - we don't measure over the Initial FTM Response,
* '1' - we measure over the Initial FTM Response
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
index 30008237323a..e7610add13f6 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
@@ -74,6 +74,7 @@
* Otherwise, use rate_n_flags from the TX command
* @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
* Must set TX_CMD_FLG_ACK with this flag.
+ * @TX_CMD_FLG_TXOP_PROT: TXOP protection requested
* @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
* @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
* @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
@@ -201,7 +202,7 @@ enum iwl_tx_cmd_sec_ctrl {
/**
* enum iwl_tx_offload_assist_flags_pos - set %iwl_tx_cmd offload_assist
values
- * @TX_CMD_OFFLD_IP_HDR_OFFSET: offset to start of IP header (in words)
+ * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
* from mac header end. For normal case it is 4 words for SNAP.
* note: tx_cmd, mac header and pad are not counted in the offset.
* This is used to help the offload in case there is tunneling such as
@@ -235,12 +236,14 @@ enum iwl_tx_offload_assist_flags_pos {
* @len: in bytes of the payload, see below for details
* @offload_assist: TX offload configuration
* @tx_flags: combination of TX_CMD_FLG_*
+ * @scratch: scratch buffer used by the device
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
* @initial_rate_index: index into the the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
+ * @reserved2: reserved
* @key: security key
* @reserved3: reserved
* @life_time: frame life time (usecs??)
@@ -249,8 +252,11 @@ enum iwl_tx_offload_assist_flags_pos {
* @dram_msb_ptr: upper bits of the scratch physical address
* @rts_retry_limit: max attempts for RTS
* @data_retry_limit: max attempts to send the data packet
- * @tid_spec: TID/tspec
+ * @tid_tspec: TID/tspec
* @pm_frame_timeout: PM TX frame timeout
+ * @reserved4: reserved
+ * @payload: payload (same as @hdr)
+ * @hdr: 802.11 header (same as @payload)
*
* The byte count (both len and next_frame_len) includes MAC header
* (24/26/30/32 bytes)
@@ -304,10 +310,11 @@ struct iwl_dram_sec_info {
* ( TX_CMD = 0x1c )
* @len: in bytes of the payload, see below for details
* @offload_assist: TX offload configuration
- * @tx_flags: combination of &iwl_tx_cmd_flags
+ * @flags: combination of &enum iwl_tx_cmd_flags
* @dram_info: FW internal DRAM storage
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
+ * @hdr: 802.11 header
*/
struct iwl_tx_cmd_gen2 {
__le16 len;
@@ -519,6 +526,8 @@ struct agg_tx_status {
* @pa_integ_res_b: tx power info
* @pa_integ_res_c: tx power info
* @measurement_req_id: tx power info
+ * @reduced_tpc: transmit power reduction used
+ * @reserved: reserved
* @tfd_info: TFD information set by the FH
* @seq_ctl: sequence control from the Tx cmd
* @byte_cnt: byte count from the Tx cmd
--
2.11.0
