Hello,
I'm trying to use a bluetooth speaker while connected to a wifi. At
first, once I started sending something to the speaker via bluetooth,
the wifi connection was slowed down a lot or even disconnected because
btcoex_enable was not set.
Now I enabled it using:
modprobe -r ath9k
modprobe ath9k btcoex_enable=1
with the result, that I can't connect to the wifi at all, even if
bluetooth is completely disabled.
Do you know how to fix this?
[ben@localhost]~% uname -r
4.11.3-200.fc25.x86_64
[ben@localhost]~% lspci -k
(...)
04:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network
Adapter (rev 01)
Subsystem: Foxconn International, Inc. Device e052
Kernel driver in use: ath9k
Kernel modules: ath9k
[ben@localhost]~% dmesg | grep ath
[ 4.482734] usbcore: registered new interface driver ath3k
[ 4.769527] ath: phy0: ASPM enabled: 0x42
[ 4.769530] ath: EEPROM regdomain: 0x6c
[ 4.769531] ath: EEPROM indicates we should expect a direct regpair map
[ 4.769533] ath: Country alpha2 being used: 00
[ 4.769533] ath: Regpair used: 0x6c
[ 4.819454] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
Thank you!
Benjamin
