This large function is concealing a LOT of obscure logic about
how the hardware functions. Time to split it up.
This first patch splits the function into two pieces - read and write,
doing away with the rw flag in the process.
Signed-off-by: Ian Molton <i...@mnementh.co.uk>
---
.../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 94 +++++++++++++++++-----
1 file changed, 73 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 2b441ce91d5f..1ee0f91b6c50 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -302,8 +302,8 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev
*sdiodev, u8 fn,
return ret;
}
-static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
- u8 regsz, void *data, bool write)
+static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
+ u8 regsz, void *data)
{
u8 func;
s32 retry = 0;
@@ -324,13 +324,66 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev
*sdiodev, u32 addr,
func = SDIO_FUNC_1;
do {
- if (!write)
- memset(data, 0, regsz);
/* for retry wait for 1 ms till bus get settled down */
if (retry)
usleep_range(1000, 2000);
+
+ ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
+ data, true);
+
+ } while (ret != 0 && ret != -ENOMEDIUM &&
+ retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
+
+ if (ret == -ENOMEDIUM) {
+ brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+ } else if (ret != 0) {
+ /*
+ * SleepCSR register access can fail when
+ * waking up the device so reduce this noise
+ * in the logs.
+ */
+ if (addr != SBSDIO_FUNC1_SLEEPCSR)
+ brcmf_err("failed to write data F%d@0x%05x, err: %d\n",
+ func, addr, ret);
+ else
+ brcmf_dbg(SDIO, "failed to write data F%d@0x%05x, err:
%d\n",
+ func, addr, ret);
+ }
+
+ return ret;
+}
+
+static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
+ u8 regsz, void *data)
+{
+ u8 func;
+ s32 retry = 0;
+ int ret;
+
+ if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM)
+ return -ENOMEDIUM;
+
+ /*
+ * figure out how to read the register based on address range
+ * 0x00 ~ 0x7FF: function 0 CCCR and FBR
+ * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
+ * The rest: function 1 silicon backplane core registers
+ */
+ if ((addr & ~REG_F0_REG_MASK) == 0)
+ func = SDIO_FUNC_0;
+ else
+ func = SDIO_FUNC_1;
+
+ do {
+ memset(data, 0, regsz);
+
+ /* for retry wait for 1 ms till bus get settled down */
+ if (retry)
+ usleep_range(1000, 2000);
+
ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
- data, write);
+ data, false);
+
} while (ret != 0 && ret != -ENOMEDIUM &&
retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
@@ -343,12 +396,13 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev
*sdiodev, u32 addr,
* in the logs.
*/
if (addr != SBSDIO_FUNC1_SLEEPCSR)
- brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
- write ? "write" : "read", func, addr, ret);
+ brcmf_err("failed to read data F%d@0x%05x, err: %d\n",
+ func, addr, ret);
else
- brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err:
%d\n",
- write ? "write" : "read", func, addr, ret);
+ brcmf_dbg(SDIO, "failed to read data F%d@0x%05x, err:
%d\n",
+ func, addr, ret);
}
+
return ret;
}
@@ -366,13 +420,11 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev
*sdiodev, u32 address)
addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
for (i = 0; i < 3; i++) {
- err = brcmf_sdiod_regrw_helper(sdiodev,
- SBSDIO_FUNC1_SBADDRLOW + i,
- 1, &addr[i], true);
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, addr[i],
+ &err);
if (err) {
brcmf_err("failed at addr: 0x%0x\n",
SBSDIO_FUNC1_SBADDRLOW + i);
- break;
}
}
@@ -407,8 +459,7 @@ u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32
addr, int *ret)
int retval;
brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
- retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 1, &data,
- false);
+ retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data);
brcmf_dbg(SDIO, "data:0x%02x\n", data);
if (ret)
@@ -426,8 +477,9 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32
addr, int *ret)
retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
if (retval)
goto done;
- retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 4, &data,
- false);
+
+ retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
+
brcmf_dbg(SDIO, "data:0x%08x\n", data);
done:
@@ -443,8 +495,8 @@ void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32
addr,
int retval;
brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
- retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 1, &data,
- true);
+ retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data);
+
if (ret)
*ret = retval;
}
@@ -458,8 +510,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32
addr,
retval = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
if (retval)
goto done;
- retval = brcmf_sdiod_regrw_helper(sdiodev, addr, 4, &data,
- true);
+
+ retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
done:
if (ret)
--
2.11.0
