Hello George, Do you happen to be running AuthSAE for authenticated mesh? I've seen this go wrong with ath9k cards using hardware encryption; in that particular case, you may want to load the module with nohwcrypt=1, it should work then.
Kind regards, Michel Stam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of George H Sent: Friday, July 28, 2017 3:43 AM To: [email protected] Subject: Problem seen with wireless mesh Hi I have two wireless products forming a wireless mesh. One (let's call it A) runs 2.6.37 kernel while the other (let's call it B) runs 3.18 kernel. The wireless mesh based on IEEE80211s runs successfully (mac80211 module). I see a problem where the communication between A to B freezes intermittently, each time the duration is between a minute and two minutes. The product A is at fault here. During this period, no ping from a PC to A succeeds. Using a serial terminal to A, I investigated and found: 1) Top doesn't show anything suspicious when the issue is hit. The same processes are seen always. 2) The watchdog on A is not triggered when the issue is hit. 3) It's not a firewall issue, had tried clearing all iptables entries. 4) I checked netstat, nothing that gave further clues. 5) Added debug printk's through the mesh code in mac80211, but I'm not seeing anything with strong evidence so far. Any tips to debug the issue? Thanks.
