On 08-08-17 08:53, Chi-Hsien Lin wrote: > > > On 08/07/2017 8:27, Arend van Spriel wrote: >> On 8/3/2017 11:37 AM, Wright Feng wrote: >>> From: Chi-Hsien Lin <chi-hsien....@cypress.com> >>> >>> Add support for CYW4373 SDIO/USB chipset. >>> CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel >>> support. >>> It's a WiFi/BT combo device. >> >> Reviewed-by: Arend van Spriel <arend.vanspr...@broadcom.com> >>> Signed-off-by: Chi-Hsien Lin <chi-hsien....@cypress.com> >>> --- >>> v2: add new chip(4737) info in commit message >> >> comment below... >> >>> --- >>> drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 + >>> drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 2 ++ >>> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++- >>> drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 9 >>> ++++++++- >>> drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 3 +++ >>> include/linux/mmc/sdio_ids.h | 1 + >>> 6 files changed, 18 insertions(+), 2 deletions(-) >>> >> >> [...] >> >>> diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h >>> index b733eb4..abacd54 100644 >>> --- a/include/linux/mmc/sdio_ids.h >>> +++ b/include/linux/mmc/sdio_ids.h >>> @@ -39,6 +39,7 @@ >>> #define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf >>> #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354 >>> #define SDIO_DEVICE_ID_BROADCOM_4356 0x4356 >>> +#define SDIO_DEVICE_ID_CYPRESS_4373 0x4373 >> >> So is there no specific Cypress SDIO vendor ID? > There is no Cypress SDIO vid. I believe the legacy chips 4343w ...etc. > shipped are still using BRCM SDIO vid. Also, 4373 project was initiated > in Broadcom so the default id was set to the Broadcom id. Will it a > requirement to add Cypress vid here?
I was just wondering about it. It seems appropriate to do so although I understand the 4373 history of things. Also for USB (in this same patch) you seem to have used a Cypress USB vendor id so things just did not look consistent. Hence I raised my comment. Regards, Arend >> >>> #define SDIO_VENDOR_ID_INTEL 0x0089 >>> #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 >>> >> >> . >>
