Add device tree binding documentation for Broadcom BCM43430 AMPAK AP6212A has this chip.
e.g compatible = "brcm,bcm43430-fmac"; NanoPi NEO Plus2 has an AMPAK AP6212A WiFi module with BCM43430 rev=1 inside. brcmf_chip_recognition found AXI chip: BCM43430, rev=1 brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 brcmf_ops_sdio_probe sdio device ID: 0xa9a6 Signed-off-by: Antony Antony <[email protected]> --- Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) NanoPi Neo Plus2 Kernel DT propsed patch https://patchwork.kernel.org/patch/9925387/ diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 590f622..9107e1a 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -6,7 +6,9 @@ connects the device to the system. Required properties: - - compatible : Should be "brcm,bcm4329-fmac". + - compatible : should be one of the following: + * "brcm,bcm4329-fmac" + * "brcm,bcm43430-fmac" Optional properties: - brcm,drive-strength : drive strength used for SDIO pins on device in mA -- 2.9.3
