Am 14.11.2017 um 18:16 schrieb [email protected]:
From: Ben Greear <[email protected]>
The 10.4 firmware defines this as a 3-bit field, as does the
mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF
at least in the firmware header I have seen. This patch
fixes the ath10k wmi header to match the firmware.
Signed-off-by: Ben Greear <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h
b/drivers/net/wireless/ath/ath10k/wmi.h
index ff15c37..9522f22 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5195,7 +5195,8 @@ enum wmi_10_4_vdev_param {
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
#define WMI_TXBF_STS_CAP_OFFSET_LSB 4
-#define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0
+#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
+#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
#define WMI_BF_SOUND_DIM_OFFSET_LSB 8
#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
i can validate this. good finding
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565
