From: Jason Uy <jason...@broadcom.com>
Add support for configurable read size so that older wifi
chips that have size restrictions can be supported.
Signed-off-by: Jason Uy <jason...@broadcom.com>
Reviewed-by: Ray Jui <ray....@broadcom.com>
Reviewed-by: Scott Branden <scott.bran...@broadcom.com>
Signed-off-by: Li Jin <li....@broadcom.com>
---
.../wireless/broadcom/brcm80211/brcmfmac/common.c | 5 +++
.../wireless/broadcom/brcm80211/brcmfmac/common.h | 2 ++
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 39 ++++++++++++++++++++--
3 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 7a2b495..e1bfcaa 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -52,6 +52,10 @@ int brcmf_msg_level;
module_param_named(debug, brcmf_msg_level, int, S_IRUSR | S_IWUSR);
MODULE_PARM_DESC(debug, "Level of debug output");
+static unsigned int brcmf_log_size;
+module_param_named(logsize, brcmf_log_size, int, 0000);
+MODULE_PARM_DESC(logsize, "Size of log output to read each time");
+
static int brcmf_p2p_enable;
module_param_named(p2pon, brcmf_p2p_enable, int, 0);
MODULE_PARM_DESC(p2pon, "Enable legacy p2p management functionality");
@@ -287,6 +291,7 @@ struct brcmf_mp_device *brcmf_get_module_param(struct
device *dev,
settings->feature_disable = brcmf_feature_disable;
settings->fcmode = brcmf_fcmode;
settings->roamoff = !!brcmf_roamoff;
+ settings->log_size = brcmf_log_size;
#ifdef DEBUG
settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
#endif
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
index a62f8e7..f3eab04 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -51,6 +51,7 @@ extern struct brcmf_mp_global_t brcmf_mp_global;
* @roamoff: Firmware roaming off?
* @ignore_probe_fail: Ignore probe failure.
* @country_codes: If available, pointer to struct for translating country
codes
+ * @log_size: limit the read size when accessing log from wifi chip
* @bus: Bus specific platform data. Only SDIO at the mmoment.
*/
struct brcmf_mp_device {
@@ -60,6 +61,7 @@ struct brcmf_mp_device {
bool roamoff;
bool ignore_probe_fail;
struct brcmfmac_pd_cc *country_codes;
+ unsigned int log_size;
union {
struct brcmfmac_sdio_pd sdio;
} bus;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 613caca..71ba680 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -2790,6 +2790,10 @@ static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
u8 line[CONSOLE_LINE_MAX], ch;
u32 n, idx, addr;
int rv;
+ unsigned int left_to_read;
+ unsigned int offset;
+ unsigned int cur_read_size;
+ unsigned int log_size = bus->sdiodev->settings->log_size;
/* Don't do anything until FWREADY updates console address */
if (bus->console_addr == 0)
@@ -2823,9 +2827,38 @@ static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
/* Read the console buffer */
addr = le32_to_cpu(c->log_le.buf);
- rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
- if (rv < 0)
- return rv;
+
+ if (log_size > 0) {
+ /* limit the amount of data to read in case wifi chip has
+ * restrictions
+ */
+ left_to_read = c->bufsize;
+ offset = 0;
+ while (left_to_read) {
+ cur_read_size = (left_to_read > log_size) ?
+ log_size :
+ left_to_read;
+
+ rv = brcmf_sdiod_ramrw(bus->sdiodev,
+ false,
+ addr + offset,
+ c->buf + offset,
+ cur_read_size);
+ if (rv < 0)
+ return rv;
+
+ left_to_read -= cur_read_size;
+ offset += cur_read_size;
+ }
+ } else {
+ rv = brcmf_sdiod_ramrw(bus->sdiodev,
+ false,
+ addr,
+ c->buf,
+ c->bufsize);
+ if (rv < 0)
+ return rv;
+ }
while (c->last != idx) {
for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
--
2.7.4
