From: Prameela Rani Garnepudi <[email protected]> Redpine bluetooth driver is a thin driver which depends on 'rsi_91x' driver for transmitting and receiving packets to/from device. It creates hci interface when attach() is called from 'rsi_91x' module.
Signed-off-by: Prameela Rani Garnepudi <[email protected]> Signed-off-by: Siva Rebbagondla <[email protected]> Signed-off-by: Amitkumar Karwar <[email protected]> --- v2: Addressed review comments from Marcel Removed unnecessary 'depends on BT && BT_RFOMM' line in Kconfig Removed redundant BT_INFO messages h_adapter initialization and declaration in a single line. Removed unnecessary error checks for HCI_RUNNING and fsm_state Allocated new skb with skb_realloc_headroom() API if headroom is not sufficient Used get_unaligned_le16 helpers Moved a structure and union from header file to btrsi.c file --- drivers/bluetooth/Kconfig | 11 +++ drivers/bluetooth/Makefile | 2 + drivers/bluetooth/btrsi.c | 216 ++++++++++++++++++++++++++++++++++++++++++++ drivers/bluetooth/rsi_hci.h | 40 ++++++++ 4 files changed, 269 insertions(+) create mode 100644 drivers/bluetooth/btrsi.c create mode 100644 drivers/bluetooth/rsi_hci.h diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 60e1c7d..56c0e16 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -378,4 +378,15 @@ config BT_QCOMSMD Say Y here to compile support for HCI over Qualcomm SMD into the kernel or say M to compile as a module. +config BT_RSI + tristate "Redpine HCI support" + default m + help + Redpine BT driver. + This driver handles BT traffic from upper layers and pass + to the RSI_91x coex module for further scheduling to device + + Say Y here to compile support for HCI over Redpine into the + kernel or say M to compile as a module. + endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 4e4e44d..712af83a 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA) += btqca.o obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o +obj-$(CONFIG_BT_RSI) += btrsi.o + btmrvl-y := btmrvl_main.o btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c new file mode 100644 index 0000000..db33482 --- /dev/null +++ b/drivers/bluetooth/btrsi.c @@ -0,0 +1,216 @@ +/** + * Copyright (c) 2017 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +e* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include "rsi_hci.h" + +struct rsi_hci_adapter { + void *priv; + struct rsi_proto_ops *proto_ops; + struct hci_dev *hdev; +}; + +static struct rsi_mod_ops rsi_bt_ops = { + .attach = rsi_hci_attach, + .detach = rsi_hci_detach, + .recv_pkt = rsi_hci_recv_pkt, +}; + +static int rsi_hci_open(struct hci_dev *hdev) +{ + return 0; +} + +static int rsi_hci_close(struct hci_dev *hdev) +{ + return 0; +} + +static int rsi_hci_flush(struct hci_dev *hdev) +{ + return 0; +} + +static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct rsi_hci_adapter *h_adapter = hci_get_drvdata(hdev); + struct sk_buff *new_skb = NULL; + + switch (bt_cb(skb)->pkt_type) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } + + if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) { + /* Insufficient skb headroom - allocate a new skb */ + new_skb = skb_realloc_headroom(skb, RSI_HEADROOM_FOR_BT_HAL); + if (unlikely(!new_skb)) + return -ENOMEM; + bt_cb(new_skb)->pkt_type = bt_cb(skb)->pkt_type; + kfree_skb(skb); + skb = new_skb; + } + + return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb, + RSI_BT_Q); +} + +int rsi_hci_recv_pkt(void *priv, u8 *pkt) +{ + struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv; + struct hci_dev *hdev = h_adapter->hdev; + struct sk_buff *skb; + + int pkt_len = get_unaligned_le16(pkt) & 0x0fff; + u8 queue_no = (get_unaligned_le16(pkt) & 0x7000) >> 12; + + if (queue_no == RSI_BT_MGMT_Q) { + u8 msg_type = pkt[14] & 0xFF; + + switch (msg_type) { + case RSI_RESULT_CONFIRM: + bt_dev_info(hdev, "BT Result Confirm"); + return 0; + case RSI_BT_BER: + bt_dev_info(hdev, "BT Ber"); + return 0; + case RSI_BT_CW: + bt_dev_info(hdev, "BT CW"); + return 0; + default: + break; + } + } + + skb = dev_alloc_skb(pkt_len); + if (!skb) + return -ENOMEM; + + memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len); + skb_put(skb, pkt_len); + h_adapter->hdev->stat.byte_rx += skb->len; + + skb->dev = (void *)hdev; + bt_cb(skb)->pkt_type = pkt[14]; + + return hci_recv_frame(hdev, skb); +} + +int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops) +{ + struct rsi_hci_adapter *h_adapter = NULL; + struct hci_dev *hdev; + int status = 0; + + h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL); + if (!h_adapter) + return -ENOMEM; + + h_adapter->priv = priv; + ops->set_bt_context(priv, h_adapter); + h_adapter->proto_ops = ops; + + hdev = hci_alloc_dev(); + if (!hdev) { + BT_ERR("Failed to alloc HCI device\n"); + goto err; + } + + h_adapter->hdev = hdev; + + if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO) + hdev->bus = HCI_SDIO; + else + hdev->bus = HCI_USB; + + hci_set_drvdata(hdev, h_adapter); + hdev->dev_type = HCI_PRIMARY; + hdev->open = rsi_hci_open; + hdev->close = rsi_hci_close; + hdev->flush = rsi_hci_flush; + hdev->send = rsi_hci_send_pkt; + + status = hci_register_dev(hdev); + if (status < 0) { + BT_ERR("%s: HCI registration failed with errcode %d\n", + __func__, status); + goto err; + } + + return 0; +err: + if (hdev) { + hci_unregister_dev(hdev); + hci_free_dev(hdev); + h_adapter->hdev = NULL; + } + kfree(h_adapter); + + return -EINVAL; +} + +void rsi_hci_detach(void *priv) +{ + struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv; + struct hci_dev *hdev; + + if (!h_adapter) + return; + + hdev = h_adapter->hdev; + if (hdev) { + hci_unregister_dev(hdev); + hci_free_dev(hdev); + h_adapter->hdev = NULL; + } + + kfree(h_adapter); +} + +struct rsi_mod_ops *rsi_get_hci_ops(void) +{ + return &rsi_bt_ops; +}; +EXPORT_SYMBOL_GPL(rsi_get_hci_ops); + +static int rsi_91x_bt_module_init(void) +{ + BT_INFO("%s: BT Module init called\n", __func__); + + return 0; +} + +static void rsi_91x_bt_module_exit(void) +{ + BT_INFO("%s: BT Module exit called\n", __func__); +} + +module_init(rsi_91x_bt_module_init); +module_exit(rsi_91x_bt_module_exit); +MODULE_AUTHOR("Redpine Signals Inc"); +MODULE_DESCRIPTION("RSI BT driver"); +MODULE_SUPPORTED_DEVICE("RSI-BT"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/bluetooth/rsi_hci.h b/drivers/bluetooth/rsi_hci.h new file mode 100644 index 0000000..6fc7757 --- /dev/null +++ b/drivers/bluetooth/rsi_hci.h @@ -0,0 +1,40 @@ +/** + * Copyright (c) 2017 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __RSI_HCI_H__ +#define __RSI_HCI_H__ + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> +#include <linux/unaligned/le_byteshift.h> +#include <linux/rsi_header.h> +#include <net/genetlink.h> + +/* RX frame types */ +#define RSI_RESULT_CONFIRM 0x80 +#define RSI_BT_PER 0x10 +#define RSI_BT_BER 0x11 +#define RSI_BT_CW 0x12 + +#define RSI_HEADROOM_FOR_BT_HAL 16 + +#define RSI_FRAME_DESC_SIZE 16 + +int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops); +void rsi_hci_detach(void *priv); +int rsi_hci_recv_pkt(void *data, u8 *pkt); + +#endif -- 2.7.4
