The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't correctly mapped to the actual CTL entries in EEPROM then it could happen that the device violates the regulations. But it can also happen that the device is then not able to be used with its full txpower on all rates.
The CTL mappings for this regdomain code were now changed to: * 2.4GHz: FCC-> ETSI * 5GHz: FCC Signed-off-by: Sven Eckelmann <[email protected]> --- drivers/net/wireless/ath/regd_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index efc363af5e41..ca1f07e55aec 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -443,7 +443,7 @@ static struct country_code_to_enum_rd allCountries[] = { {CTRY_MALAYSIA, FCC1_WORLD, "MY"}, {CTRY_MALTA, ETSI1_WORLD, "MT"}, {CTRY_MAURITIUS, ETSI1_WORLD, "MU"}, - {CTRY_MEXICO, FCC1_FCCA, "MX"}, + {CTRY_MEXICO, FCC1_WORLD, "MX"}, {CTRY_MONACO, ETSI4_WORLD, "MC"}, {CTRY_MONTENEGRO, ETSI1_WORLD, "ME"}, {CTRY_MOROCCO, APL4_WORLD, "MA"}, -- 2.11.0
