GFP_ATOMIC should only be used when the allocation is done from atomic
context. Introduce a new flag to wcn36xx_dxe_fill_skb() and use GFP_KERNEL
when pre-allocating buffers during init.
This doesn't fix an issue that was observed in the wild, but it reduces
the chance of failed allocations under memory pressure.
Signed-off-by: Daniel Mack <dan...@zonque.org>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c
b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 5672154948c3..3e180828fbfa 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -275,12 +275,14 @@ static int wcn36xx_dxe_enable_ch_int(struct wcn36xx *wcn,
u16 wcn_ch)
return 0;
}
-static int wcn36xx_dxe_fill_skb(struct device *dev, struct wcn36xx_dxe_ctl
*ctl)
+static int wcn36xx_dxe_fill_skb(struct device *dev,
+ struct wcn36xx_dxe_ctl *ctl,
+ gfp_t gfp)
{
struct wcn36xx_dxe_desc *dxe = ctl->desc;
struct sk_buff *skb;
- skb = alloc_skb(WCN36XX_PKT_SIZE, GFP_ATOMIC);
+ skb = alloc_skb(WCN36XX_PKT_SIZE, gfp);
if (skb == NULL)
return -ENOMEM;
@@ -307,7 +309,7 @@ static int wcn36xx_dxe_ch_alloc_skb(struct wcn36xx *wcn,
cur_ctl = wcn_ch->head_blk_ctl;
for (i = 0; i < wcn_ch->desc_num; i++) {
- wcn36xx_dxe_fill_skb(wcn->dev, cur_ctl);
+ wcn36xx_dxe_fill_skb(wcn->dev, cur_ctl, GFP_KERNEL);
cur_ctl = cur_ctl->next;
}
@@ -533,7 +535,7 @@ static int wcn36xx_rx_handle_packets(struct wcn36xx *wcn,
while (!(dxe->ctrl & WCN36XX_DXE_CTRL_VALID_MASK)) {
skb = ctl->skb;
dma_addr = dxe->dst_addr_l;
- ret = wcn36xx_dxe_fill_skb(wcn->dev, ctl);
+ ret = wcn36xx_dxe_fill_skb(wcn->dev, ctl, GFP_ATOMIC);
if (0 == ret) {
/* new skb allocation ok. Use the new one and queue
* the old one to network system.
--
2.14.3
