Remove unnecessary MT_TX_ALC_CFG_4 configuration since the register value
will be properly set according to the usage of an external power amplifier
Signed-off-by: Lorenzo Bianconi <lorenzo.bianc...@redhat.com>
---
Changes since v1:
- remove first initialization in order to have the writes to that register
grouped together in the same if/else chunk
---
drivers/net/wireless/mediatek/mt76/mt76x2_phy.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
index f28c55746cea..42414c5fa01e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
@@ -257,7 +257,6 @@ mt76x2_phy_set_txpower_regs(struct mt76x2_dev *dev, enum
nl80211_band band)
mt76_wr(dev, MT_TX_ALC_CFG_2, 0x1b0f0400);
mt76_wr(dev, MT_TX_ALC_CFG_3, 0x1b0f0476);
}
- mt76_wr(dev, MT_TX_ALC_CFG_4, 0);
if (mt76x2_ext_pa_enabled(dev, band))
pa_mode_adj = 0x04000000;
--
2.16.3
