Josh Boyer <jwbo...@kernel.org> writes:

> On Tue, Mar 27, 2018 at 12:41 PM, ojab // <o...@ojab.ru> wrote:
>> [please CC me since I'm not subscribed to the lists and terribly sorry
>> for HTML mails]
>>
>> Oh hai!
>>
>> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
>> supported by linux-firmware (git master), card init fails with
>>
>>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch
>> board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from
>> ath10k/QCA9984/hw1.0/board-2.bin
>>
>> It works fine with board-2.bin from the compex website [1] (can be
>> downloaded directly from
>> https://bugzilla.kernel.org/attachment.cgi?id=274959).
>> What should be done to have it upstreamed?
>
> This is likely a question for Kalle.  I would expect an update to the
> existing board-2.bin file submitted through Qualcomm with support for
> that device.

Yes, this should have been sent to the ath10k list, not to
linux-firmware.

https://wireless.wiki.kernel.org/en/users/drivers/ath10k/support

-- 
Kalle Valo

Reply via email to