Hi Kalle,
The ath10k-check warning has been corrected and I have sent the v2 for
the same.
Thanks,
Rakesh Pillai.
On 2018-04-16 18:46, Kalle Valo wrote:
Rakesh Pillai <pill...@codeaurora.org> wrote:
By default ath10k driver enables the support for HW_CHECKSUM
(NETIF_F_HW_CSUM). Since the TCP/UDP checksum calculation is not
enabled
in the wcn3990 firmware the checksum is incorrect in the TCP/UDP
packets
and all patckets are dropped. But due note that wcn3990 support in
ath10k is still incomplete so this isn't a critical fix (yet).
Enable hw checksum calculations in wcn3990 hardware by
setting the proper flags in msdu descriptor tso flags.
Signed-off-by: Rakesh Pillai <pill...@codeaurora.org>
Signed-off-by: Kalle Valo <kv...@codeaurora.org>
Introduces a new sparse warning:
potku:~/ath10k/src/ath$ ath10k-check
drivers/net/wireless/ath/ath10k/htt_tx.c:1480:47: warning: invalid
assignment: |=
drivers/net/wireless/ath/ath10k/htt_tx.c:1480:47: left side has
type restricted __le32
drivers/net/wireless/ath/ath10k/htt_tx.c:1480:47: right side has
type unsigned long
Patch set to Changes Requested.
