> From: [email protected] > [mailto:[email protected]] On Behalf Of David Dean Zhang > Sent: Wednesday, April 18, 2018 9:01 PM
> I updated the firmware and tried to call some low level functions, like > WMI_PRIO_TX_SECTORS_NUMBER_CMDID and WMI_SET_RF_SECTOR_ON_CMDID . > The previous errors have gone but it still has errors: > wil6210 0000:03:00.0 wlp3s0: wmi_event_handle: Unhandled event 0x19a5 > wil6210 0000:03:00.0 wlp3s0: wmi_call: wmi_call(0x09a6->0x19a6) timeout 2000 > msec > So I am wondering whether it is because the chipset does not support these > wmi commands. I just want to know how to use these commands and how to > disable TXSS. I appreciate if anyone could provide some suggestions. Thanks. This is a bug in FW that upon WMI_PRIO_TX_SECTORS_NUMBER_CMDID, wrong event is returned. Most likely that the WMI_PRIO_TX_SECTORS_NUMBER_CMDID was handled successfully. The bug is not critical - event 0x19a5 is returned instead of 0x19a6 (as can be seen in dmesg). Another option for disabling TXSS/BRP and hopefully to keep the sector locked is by using WMI_BF_CONTROL_CMDID. Setting "triggers" and "long_term_enable" to 0 should disable BF completely. Thanks, Dedy.
