On Sun 25 Mar 22:41 PDT 2018, Govind Singh wrote:
> Add qmi message required for enabling and disabling
> target to qmi server running in Q6.
>
> Signed-off-by: Govind Singh <govi...@codeaurora.org>
> ---
> drivers/net/wireless/ath/ath10k/qmi.c | 226
> +++++++++++++++++++++++++++++++++-
> drivers/net/wireless/ath/ath10k/qmi.h | 62 ++++++----
> 2 files changed, 264 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c
> b/drivers/net/wireless/ath/ath10k/qmi.c
> index f23d0fe..331a528 100644
> --- a/drivers/net/wireless/ath/ath10k/qmi.c
> +++ b/drivers/net/wireless/ath/ath10k/qmi.c
> @@ -35,7 +35,30 @@
> #define WLFW_CLIENT_ID 0x4b4e454c
> #define WLFW_TIMEOUT 500
>
> -static struct ath10k_qmi *qmi;
> +static struct ath10k_qmi {
> + struct platform_device *pdev;
> + struct qmi_handle qmi_hdl;
> + struct sockaddr_qrtr sq;
> + bool fw_ready;
> + bool msa_ready;
> + struct work_struct work_svc_arrive;
> + struct work_struct work_svc_exit;
> + struct work_struct work_msa_ready;
> + struct workqueue_struct *event_wq;
> + spinlock_t event_lock; /* spinlock for fw ready status*/
> + u32 nr_mem_region;
> + struct ath10k_msa_mem_region_info
> + mem_region[MAX_NUM_MEMORY_REGIONS];
> + phys_addr_t msa_pa;
> + u32 msa_mem_size;
> + void *msa_va;
> + struct ath10k_qmi_chip_info chip_info;
> + struct ath10k_qmi_board_info board_info;
> + struct ath10k_qmi_soc_info soc_info;
> + struct ath10k_qmi_fw_version_info fw_version_info;
> + char fw_build_id[MAX_BUILD_ID_LEN + 1];
> + struct ath10k_qmi_cal_data cal_data[MAX_NUM_CAL_V01];
> +} *qmi;
Don't end your patch series with a move of this structure, fold it back
into each patch.
>
> static int
> ath10k_qmi_map_msa_permissions(struct ath10k_msa_mem_region_info *mem_region)
> @@ -444,6 +467,207 @@ int ath10k_qmi_send_cal_report_req(struct ath10k_qmi
> *qmi)
> return ret;
> }
>
> +static int
> +ath10k_qmi_mode_send_sync_msg(enum wlfw_driver_mode_enum_v01 mode)
> +{
> + struct wlfw_wlan_mode_resp_msg_v01 *resp;
4 bytes
> + struct wlfw_wlan_mode_req_msg_v01 *req;
6 bytes, use the stack.
> + struct qmi_txn txn;
> + int ret;
> +
> + req = kzalloc(sizeof(*req), GFP_KERNEL);
> + if (!req)
> + return -ENOMEM;
> +
> + resp = kzalloc(sizeof(*resp), GFP_KERNEL);
> + if (!resp) {
> + kfree(req);
> + return -ENOMEM;
> + }
> +
> + ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
> + wlfw_wlan_mode_resp_msg_v01_ei,
> + resp);
> + if (ret < 0) {
> + pr_err("fail to init txn for mode req %d ret %d\n", mode, ret);
> + goto out;
> + }
> +
> + req->mode = mode;
> + req->hw_debug_valid = 1;
> + req->hw_debug = 0;
> +
> + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
> + QMI_WLFW_WLAN_MODE_REQ_V01,
> + WLFW_WLAN_MODE_REQ_MSG_V01_MAX_MSG_LEN,
> + wlfw_wlan_mode_req_msg_v01_ei, req);
> + if (ret < 0) {
> + qmi_txn_cancel(&txn);
> + pr_err("send mode req failed, mode: %d ret: %d\n",
> + mode, ret);
> + goto out;
> + }
> +
> + ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ);
> + if (ret < 0)
> + goto out;
> +
> + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
> + pr_err("qmi mode request rejected:");
> + pr_err("mode:%d result:%d error:%d\n",
> + mode, resp->resp.result, resp->resp.error);
> + ret = resp->resp.result;
> + goto out;
> + }
> +
> + pr_debug("wlan Mode request completed, mode: %d\n", mode);
> + kfree(resp);
> + kfree(req);
> + return 0;
> +
> +out:
> + kfree(resp);
> + kfree(req);
> + return ret;
> +}
> +
> +static int
> +ath10k_qmi_cfg_send_sync_msg(struct wlfw_wlan_cfg_req_msg_v01 *data)
> +{
> + struct wlfw_wlan_cfg_resp_msg_v01 *resp;
4 bytes, use stack
> + struct wlfw_wlan_cfg_req_msg_v01 *req;
This is larger, use heap
> + struct qmi_txn txn;
> + int ret;
> +
> + req = kzalloc(sizeof(*req), GFP_KERNEL);
> + if (!req)
> + return -ENOMEM;
> +
> + resp = kzalloc(sizeof(*resp), GFP_KERNEL);
> + if (!resp) {
> + kfree(req);
> + return -ENOMEM;
> + }
> +
> + ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
> + wlfw_wlan_cfg_resp_msg_v01_ei,
> + resp);
> + if (ret < 0) {
> + pr_err("fail to init txn for config req %d\n", ret);
> + goto out;
> + }
> +
> + memcpy(req, data, sizeof(*req));
I see no reason to create a local copy of this struct, just pass data to
qmi_send_request.
> +
> + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
> + QMI_WLFW_WLAN_CFG_REQ_V01,
> + WLFW_WLAN_CFG_REQ_MSG_V01_MAX_MSG_LEN,
> + wlfw_wlan_cfg_req_msg_v01_ei, req);
> + if (ret < 0) {
> + qmi_txn_cancel(&txn);
> + pr_err("send config req failed %d\n", ret);
> + goto out;
> + }
> +
> + ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ);
> + if (ret < 0)
> + goto out;
> +
> + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
> + pr_err("qmi cfg request rejected:");
> + pr_err("result:%d error:%d\n",
> + resp->resp.result, resp->resp.error);
> + ret = resp->resp.result;
> + goto out;
> + }
> +
> + pr_debug("wlan config request completed\n");
> + kfree(resp);
> + kfree(req);
> + return 0;
> +
> +out:
> + kfree(resp);
> + kfree(req);
> + return ret;
> +}
> +
> +int ath10k_qmi_wlan_enable(struct ath10k_qmi_wlan_enable_cfg *config,
> + enum ath10k_qmi_driver_mode mode,
> + const char *host_version)
> +{
> + struct wlfw_wlan_cfg_req_msg_v01 req;
> + int ret;
> + u32 i;
> +
> + pr_debug("mode: %d, config: %p:\n",
> + mode, config);
Use dev_dbg() and dev_err()
> + memset(&req, 0, sizeof(req));
> + if (!config) {
> + pr_err("wlan enable Config Invalid:%p\n",
> + config);
> + ret = -EINVAL;
> + return ret;
> + }
> +
> + req.host_version_valid = 0;
> +
> + req.tgt_cfg_valid = 1;
> + if (config->num_ce_tgt_cfg > QMI_WLFW_MAX_NUM_CE_V01)
> + req.tgt_cfg_len = QMI_WLFW_MAX_NUM_CE_V01;
> + else
> + req.tgt_cfg_len = config->num_ce_tgt_cfg;
> + for (i = 0; i < req.tgt_cfg_len; i++) {
> + req.tgt_cfg[i].pipe_num = config->ce_tgt_cfg[i].pipe_num;
> + req.tgt_cfg[i].pipe_dir = config->ce_tgt_cfg[i].pipe_dir;
> + req.tgt_cfg[i].nentries = config->ce_tgt_cfg[i].nentries;
> + req.tgt_cfg[i].nbytes_max = config->ce_tgt_cfg[i].nbytes_max;
> + req.tgt_cfg[i].flags = config->ce_tgt_cfg[i].flags;
> + }
> +
> + req.svc_cfg_valid = 1;
> + if (config->num_ce_svc_pipe_cfg > QMI_WLFW_MAX_NUM_SVC_V01)
> + req.svc_cfg_len = QMI_WLFW_MAX_NUM_SVC_V01;
> + else
> + req.svc_cfg_len = config->num_ce_svc_pipe_cfg;
> + for (i = 0; i < req.svc_cfg_len; i++) {
> + req.svc_cfg[i].service_id = config->ce_svc_cfg[i].service_id;
> + req.svc_cfg[i].pipe_dir = config->ce_svc_cfg[i].pipe_dir;
> + req.svc_cfg[i].pipe_num = config->ce_svc_cfg[i].pipe_num;
> + }
> +
> + req.shadow_reg_valid = 1;
> + if (config->num_shadow_reg_cfg >
> + QMI_WLFW_MAX_NUM_SHADOW_REG_V01)
> + req.shadow_reg_len = QMI_WLFW_MAX_NUM_SHADOW_REG_V01;
> + else
> + req.shadow_reg_len = config->num_shadow_reg_cfg;
> +
> + memcpy(req.shadow_reg, config->shadow_reg_cfg,
> + sizeof(struct wlfw_shadow_reg_cfg_s_v01) * req.shadow_reg_len);
> +
> + ret = ath10k_qmi_cfg_send_sync_msg(&req);
Either move all of the req buildup into ath10k_qmi_cfg_send_sync_msg()
or inline that function here - they are logically the two parts of the
same function, don't split it like this.
> + if (ret) {
> + pr_err("wlan qmi config send failed\n");
> + return ret;
> + }
> +
> + ret = ath10k_qmi_mode_send_sync_msg(mode);
> + if (ret) {
> + pr_err("wlan qmi mode send failed\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ath10k_qmi_wlan_enable);
Regards,
Bjorn
