From: Ganapathi Raju <[email protected]> Radio capabilities packet is not prepared properly for 40MHZ case, ppe_ack_rate is a two byte variable which is initialized wrongly, hence we are unable to connect, resolved by assigning it properly.
Signed-off-by: Ganapathi Raju <[email protected]> Signed-off-by: Sushant Kumar Mishra <[email protected]> --- drivers/net/wireless/rsi/rsi_91x_mgmt.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c index d0e5937..8280f32 100644 --- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c +++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c @@ -334,20 +334,17 @@ static int rsi_load_radio_caps(struct rsi_common *common) struct ieee80211_conf *conf = &hw->conf; if (conf_is_ht40_plus(conf)) { - radio_caps->radio_cfg_info = - RSI_CMDDESC_LOWER_20_ENABLE; - radio_caps->radio_info = - RSI_CMDDESC_LOWER_20_ENABLE; + radio_caps->ppe_ack_rate = + cpu_to_le16(LOWER_20_ENABLE | + (LOWER_20_ENABLE >> 12)); } else if (conf_is_ht40_minus(conf)) { - radio_caps->radio_cfg_info = - RSI_CMDDESC_UPPER_20_ENABLE; - radio_caps->radio_info = - RSI_CMDDESC_UPPER_20_ENABLE; + radio_caps->ppe_ack_rate = + cpu_to_le16(UPPER_20_ENABLE | + (UPPER_20_ENABLE >> 12)); } else { - radio_caps->radio_cfg_info = - RSI_CMDDESC_40MHZ; - radio_caps->radio_info = - RSI_CMDDESC_FULL_40_ENABLE; + radio_caps->ppe_ack_rate = + cpu_to_le16((BW_40MHZ << 12) | + FULL40M_ENABLE); } } } -- 2.5.5
