On Sun, Jul 29, 2018 at 04:16:56PM +0300, Andy Shevchenko wrote:
> There are a lot of examples in the kernel where PCI_VDEVICE() is used and
> still
> looks not so convenient due to additional driver_data field attached.
>
> Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in
> shortest
> possible form. For example,
>
> before:
>
> { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
> (kernel_ulong_t) &dwc3_pci_mrfld_properties, },
>
> after:
>
> { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) },
>
> Drivers can be converted later on in independent way.
>
> While here, remove the unused macro with the same name
> from Ralink wireless driver.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
Applied with Kalle's ack to pci/misc for v4.19, thanks!
> ---
>
> - Add vend to the device (Bjorn)
>
> Bjorn, this also looks good.
>
> drivers/net/wireless/ralink/rt2x00/rt2x00pci.h | 6 ------
> include/linux/pci.h | 15 +++++++++++++++
> 2 files changed, 15 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> index bc0ca5f58f38..283e2e607bba 100644
> --- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> @@ -27,12 +27,6 @@
> #include <linux/io.h>
> #include <linux/pci.h>
>
> -/*
> - * This variable should be used with the
> - * pci_driver structure initialization.
> - */
> -#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
> -
> /*
> * PCI driver handlers.
> */
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index d0961aefdbae..fe060114a647 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -825,6 +825,21 @@ struct pci_driver {
> .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
> .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
>
> +/**
> + * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very
> short form
> + * @vend: the vendor name (without PCI_VENDOR_ID_ prefix)
> + * @dev: the device name (without PCI_DEVICE_ID_<vend>_ prefix)
> + * @data: the driver data to be filled
> + *
> + * This macro is used to create a struct pci_device_id that matches a
> + * specific PCI device. The subvendor, and subdevice fields will be set
> + * to PCI_ANY_ID.
> + */
> +#define PCI_DEVICE_DATA(vend, dev, data) \
> + .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##vend##_##dev,
> \
> + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \
> + .driver_data = (kernel_ulong_t)(data)
> +
> enum {
> PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */
> PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */
> --
> 2.18.0
>
