Use default value of TX_SW_CFG2 register that is in charge of LNA timings. Works for somewhat higher RX throughput.
Signed-off-by: Tomislav Požega <[email protected]> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index a5eb17a..c5d0fb1 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -5324,7 +5324,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) } else if (rt2x00_rt(rt2x00dev, RT6352)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x000C0408); rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002); rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F); rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606); -- 1.7.0.4
