Re: [PATCH v4 4/8] rt2800: fix registers init for MT7620

[Tom Psyborg]

chip version support exist in daniel's tree since a long time ago. so
don't disable registers initialization but try to upstream his
changes.

changing TX_SW_CFG* entries did not make any noticeable difference in
my tests either, besides small RX improvement with configured
TX_SW_CFG2.

waiting for more of your test results

On 12/10/2018, Stanislaw Gruszka <sgrus...@redhat.com> wrote:
> There is duplicated 'if (rt2x00_rt(rt2x00dev, RT6352))' entry that
> causes we do not perform register initialization for RT6352 (MT7620
> SOCs) in correct branch. Fix this and disable registers initialization
> that is specific to particular MT7620 revision.
>
> Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com>
> ---
>  drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> index daf20d7424ac..16d6d99b1d44 100644
> --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> @@ -5451,8 +5451,7 @@ static int rt2800_init_registers(struct rt2x00_dev
> *rt2x00dev)
>                                             0x00000000);
>               }
>       } else if (rt2x00_rt(rt2x00dev, RT5390) ||
> -                rt2x00_rt(rt2x00dev, RT5392) ||
> -                rt2x00_rt(rt2x00dev, RT6352)) {
> +                rt2x00_rt(rt2x00dev, RT5392)) {
>               rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
>               rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
>               rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
> @@ -5466,6 +5465,10 @@ static int rt2800_init_registers(struct rt2x00_dev
> *rt2x00dev)
>               rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
>               rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
>               rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x000C0408);
> +             /* TODO add chip version support and init registers
> +              * according to the version.
> +              */
> +#if 0
>               rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
>               rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
>               rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
> @@ -5480,6 +5483,7 @@ static int rt2800_init_registers(struct rt2x00_dev
> *rt2x00dev)
>               reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
>               rt2x00_set_field32(&reg, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
>               rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
> +#endif
>       } else {
>               rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
>               rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
> --
> 2.7.5
>
>