Hello On Tue, Oct 16, 2018 at 01:32:18PM +0200, Tom Psyborg wrote: > I am sending you two builds privately so please check if there are any > differences between the two builds and report back. Thanks.
I extracted rt2800lib.ko module from provided images, did disassembly via: ./staging_dir/toolchain-mipsel_24kc_gcc-7.3.0_musl/bin/mipsel-openwrt-linux-objdump \ -d -r --prefix-addresses ~/rt2800lib-BUILDn.ko > ~/BUILDn.dump.txt command and compered disassembled code. Here is difference: $ diff -up BUILD1.dump.txt BUILD2.dump.txt --- BUILD1.dump.txt 2018-10-16 16:40:34.834220838 +0200 +++ BUILD2.dump.txt 2018-10-16 16:40:40.187219211 +0200 @@ -1,5 +1,5 @@ -/home/stasiu/rt2800lib-BUILD1.ko: file format elf32-tradlittlemips +/home/stasiu/rt2800lib-BUILD2.ko: file format elf32-tradlittlemips Disassembly of section .text: @@ -9374,7 +9374,7 @@ Disassembly of section .text: 00007f80 <rt2800_clear_beacon+0x224> jalr v0 00007f84 <rt2800_clear_beacon+0x228> move a0,s0 00007f88 <rt2800_clear_beacon+0x22c> lhu v1,732(s0) -00007f8c <rt2800_clear_beacon+0x230> li v0,21392 +00007f8c <rt2800_clear_beacon+0x230> li v0,25426 00007f90 <rt2800_clear_beacon+0x234> bne v1,v0,0000810c <rt2800_clear_beacon+0x3b0> 00007f94 <rt2800_clear_beacon+0x238> li a2,1025 00007f98 <rt2800_clear_beacon+0x23c> lw v0,4(s0) There is no difference in init_registers (which is inlined in rt2800_enable_radio). The only difference is in some number rt2800_clear_beacon() function. Regards Stanislaw
