On Oct 18, Stanislaw Gruszka wrote:
> On Thu, Oct 18, 2018 at 12:35:32AM +0200, Lorenzo Bianconi wrote:
> > Add submit_urb and rx_urb static tracepoints in mt76-usb module.
> > Move trace_mac_txstat_fetch in mt76x02_mac_load_tx_status routine
> > in order to be available to usb drivers. Moreover remove
> > no longer used mt76x0/trace.{c,h}
> >
> > Signed-off-by: Lorenzo Bianconi <[email protected]>
> > ---
> > @@ -54,7 +53,7 @@ mt76x0_rf_csr_wr(struct mt76x02_dev *dev, u32 offset, u8
> > value)
> > FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) |
> > MT_RF_CSR_CFG_WR |
> > MT_RF_CSR_CFG_KICK);
> > - trace_mt76x0_rf_write(&dev->mt76, bank, offset, value);
>
> I think tracing RF registers writes/read can still be useful.
Hi Stanislaw,
I removed tracing for RF registers since these operations are already tracked in
mt76_wr/mt76_rr so I thought they were redundant. Do you think deducing rf
read/write operations from mt76_{rr,wr} tracing is too convoluted? If so I
can reintroduce them in v2.
Regards,
Lorenzo
>
> Thanks
> Stanislaw
