> MT_BBP(AGC, 8) register has values depend on band in
> mt76x0_bbp_switch_tab, so we should not overwrite other fields
> than MT_BBP_AGC_GAIN when setting gain.
>
> This can fix performance issues when connecting to 2.4GHz AP.
>
> Fixes: 4636a2544c3b ("mt76x0: phy: align channel gain logic to mt76x2 one")
> Signed-off-by: Stanislaw Gruszka <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
> b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
> index ba98814ae47d..88dd0aa7e877 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
> @@ -690,10 +690,8 @@ static void mt76x0_phy_temp_sensor(struct mt76x02_dev
> *dev)
> static void mt76x0_phy_set_gain_val(struct mt76x02_dev *dev)
> {
> u8 gain = dev->cal.agc_gain_cur[0] - dev->cal.agc_gain_adjust;
> - u32 val = 0x122c << 16 | 0xf2;
>
> - mt76_wr(dev, MT_BBP(AGC, 8),
> - val | FIELD_PREP(MT_BBP_AGC_GAIN, gain));
> + mt76_rmw_field(dev, MT_BBP(AGC, 8), MT_BBP_AGC_GAIN, gain);
>
> if ((dev->mt76.chandef.chan->flags & IEEE80211_CHAN_RADAR) &&
> !is_mt7630(dev))
> --
> 2.7.5
>
Acked-by: Lorenzo Bianconi <[email protected]>
