On 2018-11-05 15:58, Kalle Valo wrote: > Stanislaw Gruszka <[email protected]> writes: > >> On Thu, Oct 25, 2018 at 06:18:33PM +0200, Stanislaw Gruszka wrote: >>> We use always 1 as band parameter for MCU_CAL_LC, this break 2GHz, >>> we should use 0 for this band instead. >>> >>> Patch fixes problems happened sometimes when try to associate with 2GHz >>> AP and manifest by errors like below: >>> >>> [14680.920823] wlan0: authenticate with 18:31:bf:c0:51:b0 >>> [14681.109506] wlan0: send auth to 18:31:bf:c0:51:b0 (try 1/3) >>> [14681.310454] wlan0: send auth to 18:31:bf:c0:51:b0 (try 2/3) >>> [14681.518469] wlan0: send auth to 18:31:bf:c0:51:b0 (try 3/3) >>> [14681.726499] wlan0: authentication with 18:31:bf:c0:51:b0 timed out >>> >>> Fixes: 9aec146d0f6b ("mt76x0: pci: introduce mt76x0_phy_calirate routine") >>> Signed-off-by: Stanislaw Gruszka <[email protected]> >>> --- >>> This is for 4.20. >> >> Actually it is not needed for 4.20, bacause the new calibrate code is >> not use for USB in 4.20. It start to be used since: >> >> commit e868a944c55b1f42303ab2941dc1aaada9a3570c >> Author: Lorenzo Bianconi <[email protected]> >> Date: Mon Oct 15 14:18:05 2018 +0200 >> >> mt76x0: phy: unify calibration between mt76x0u and mt76x0e > > So what should happen to this patch? Will Felix take it? Yes, I will take it.
- Felix
