From: Naveen Gupta <[email protected]> The number of words that the read FIFO has to contain except the end of frame before sends data back to the host. Max watermark = (512B - 2* (BurstLength))/4 = (512 - 128)/4 = 384/4 = 0x60 so if burst length (i.e. BurstLength = 64) is increased, watermark has to be reduced. This is the optimal setting for this chip.
Reviewed-by: Arend van Spriel <[email protected]> Signed-off-by: Naveen Gupta <[email protected]> Signed-off-by: Chi-Hsien Lin <[email protected]> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 73a034172c4c..fe0cb398ab44 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -52,6 +52,7 @@ /* watermark expressed in number of words */ #define DEFAULT_F2_WATERMARK 0x8 #define CY_4373_F2_WATERMARK 0x40 +#define CY_43012_F2_WATERMARK 0x60 #ifdef DEBUG @@ -4173,6 +4174,17 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, CY_4373_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB, &err); break; + case SDIO_DEVICE_ID_CYPRESS_43012: + brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", + CY_43012_F2_WATERMARK); + brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, + CY_43012_F2_WATERMARK, &err); + devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, + &err); + devctl |= SBSDIO_DEVCTL_F2WM_ENAB; + brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, + &err); + break; default: brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, DEFAULT_F2_WATERMARK, &err); -- 2.1.0
