Since we implement beconing on USB now, similar interfaces should be supported for USB as are for MMIO. Tested only for AP and IBSS modes.
Signed-off-by: Stanislaw Gruszka <[email protected]> --- v2: set VHT_IBSS, vht reates are supported in ibss. .../net/wireless/mediatek/mt76/mt76x02_util.c | 23 ++++++++++--------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c index edc84699d621..7f3747d0791f 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c @@ -150,19 +150,8 @@ void mt76x02_init_device(struct mt76x02_dev *dev) mt76x02_dfs_init_detector(dev); wiphy->reg_notifier = mt76x02_regd_notifier; - wiphy->iface_combinations = mt76x02_if_comb; - wiphy->n_iface_combinations = ARRAY_SIZE(mt76x02_if_comb); - wiphy->interface_modes = - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_AP) | -#ifdef CONFIG_MAC80211_MESH - BIT(NL80211_IFTYPE_MESH_POINT) | -#endif - BIT(NL80211_IFTYPE_ADHOC); - wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; - wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_VHT_IBSS); /* init led callbacks */ if (IS_ENABLED(CONFIG_MT76_LEDS)) { @@ -172,6 +161,18 @@ void mt76x02_init_device(struct mt76x02_dev *dev) } } + wiphy->iface_combinations = mt76x02_if_comb; + wiphy->n_iface_combinations = ARRAY_SIZE(mt76x02_if_comb); + wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_ADHOC); + + wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_VHT_IBSS); + hw->sta_data_size = sizeof(struct mt76x02_sta); hw->vif_data_size = sizeof(struct mt76x02_vif); -- 2.19.2
