The peer param id for PEER_PARAM_USE_FIXED_PWR is different for tlv and non-tlv firmware. This causes incorrect peer param to be set by the driver to the firmware(tlv/non-tlv).
Create seperate peer param map for tlv and non-tlv firmware and attach the peer param id based on the firmware type during the init. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <[email protected]> --- This change is dependent on the below patchset ath10k: add support for controlling tx power to a station (https://patchwork.kernel.org/patch/9562405/) --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/debugfs_sta.c | 2 +- drivers/net/wireless/ath/ath10k/mac.c | 16 ++++++++-------- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 19 +++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.h | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 19 +++++++++++++++++++ 7 files changed, 84 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 2f43600..5be2d5d 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -180,6 +180,7 @@ struct ath10k_wmi { struct wmi_cmd_map *cmd; struct wmi_vdev_param_map *vdev_param; struct wmi_pdev_param_map *pdev_param; + struct wmi_peer_param_map *peer_param; const struct wmi_ops *ops; const struct wmi_peer_flags_map *peer_flags; diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c index 4778a45..a887f71 100644 --- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c +++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c @@ -441,7 +441,7 @@ ath10k_dbg_sta_write_peer_debug_trigger(struct file *file, } ret = ath10k_wmi_peer_set_param(ar, arsta->arvif->vdev_id, sta->addr, - WMI_PEER_DEBUG, peer_debug_trigger); + ar->wmi.peer_param->debug, peer_debug_trigger); if (ret) { ath10k_warn(ar, "failed to set param to trigger peer tid logs for station ret: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index bce2698..dece2b0 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2744,7 +2744,7 @@ static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif, return -EINVAL; return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr, - WMI_PEER_SMPS_STATE, + ar->wmi.peer_param->smps_state, ath10k_smps_map[smps]); } @@ -2901,7 +2901,7 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw, * poked with peer param command. */ ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid, - WMI_PEER_DUMMY_VAR, 1); + ar->wmi.peer_param->dummy_var, 1); if (ret) { ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n", arvif->bssid, arvif->vdev_id, ret); @@ -6189,7 +6189,7 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (sta && sta->tdls) ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, - WMI_PEER_AUTHORIZE, 1); + ar->wmi.peer_param->authorize, 1); exit: mutex_unlock(&ar->conf_mutex); @@ -6280,7 +6280,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) sta->addr, bw, mode); err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, - WMI_PEER_PHYMODE, mode); + ar->wmi.peer_param->phymode, mode); if (err) { ath10k_warn(ar, "failed to update STA %pM peer phymode %d: %d\n", sta->addr, mode, err); @@ -6288,7 +6288,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) } err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, - WMI_PEER_CHAN_WIDTH, bw); + ar->wmi.peer_param->chan_width, bw); if (err) ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n", sta->addr, bw, err); @@ -6299,7 +6299,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) sta->addr, nss); err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, - WMI_PEER_NSS, nss); + ar->wmi.peer_param->nss, nss); if (err) ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n", sta->addr, nss, err); @@ -6310,7 +6310,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) sta->addr, smps); err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, - WMI_PEER_SMPS_STATE, smps); + ar->wmi.peer_param->smps_state, smps); if (err) ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n", sta->addr, smps, err); @@ -6384,7 +6384,7 @@ static int ath10k_sta_set_txpwr(struct ieee80211_hw *hw, mutex_lock(&ar->conf_mutex); ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, - WMI_PEER_USE_FIXED_PWR, txpwr); + ar->wmi.peer_param->use_fixed_power, txpwr); if (ret) { ath10k_warn(ar, "failed to set tx power for station ret: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 5d05bff..13f9084 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -4077,6 +4077,24 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = { .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, }; +static struct wmi_peer_param_map wmi_tlv_peer_param_map = { + .smps_state = WMI_TLV_PEER_SMPS_STATE, + .ampdu = WMI_TLV_PEER_AMPDU, + .authorize = WMI_TLV_PEER_AUTHORIZE, + .chan_width = WMI_TLV_PEER_CHAN_WIDTH, + .nss = WMI_TLV_PEER_NSS, + .use_4addr = WMI_TLV_PEER_USE_4ADDR, + .membership = WMI_TLV_PEER_MEMBERSHIP, + .user_pos = WMI_TLV_PEER_USERPOS, + .crit_proto_hint_enabled = WMI_TLV_PEER_CRIT_PROTO_HINT_ENABLED, + .tx_fail_cnt_thr = WMI_TLV_PEER_TX_FAIL_CNT_THR, + .set_hw_retry_cts2s = WMI_TLV_PEER_SET_HW_RETRY_CTS2S, + .ibss_atim_win_len = WMI_TLV_PEER_IBSS_ATIM_WINDOW_LENGTH, + .phymode = WMI_TLV_PEER_PHYMODE, + .use_fixed_power = WMI_TLV_PEER_USE_FIXED_PWR, + .dummy_var = WMI_TLV_PEER_DUMMY_VAR, +}; + static struct wmi_vdev_param_map wmi_tlv_vdev_param_map = { .rts_threshold = WMI_TLV_VDEV_PARAM_RTS_THRESHOLD, .fragmentation_threshold = WMI_TLV_VDEV_PARAM_FRAGMENTATION_THRESHOLD, @@ -4265,6 +4283,7 @@ void ath10k_wmi_tlv_attach(struct ath10k *ar) ar->wmi.cmd = &wmi_tlv_cmd_map; ar->wmi.vdev_param = &wmi_tlv_vdev_param_map; ar->wmi.pdev_param = &wmi_tlv_pdev_param_map; + ar->wmi.peer_param = &wmi_tlv_peer_param_map; ar->wmi.ops = &wmi_tlv_ops; ar->wmi.peer_flags = &wmi_tlv_peer_flags_map; } diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 4fba581..8d50808 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -533,6 +533,24 @@ enum wmi_tlv_vdev_param { WMI_TLV_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE, }; +enum wmi_tlv_peer_param { + WMI_TLV_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ + WMI_TLV_PEER_AMPDU = 0x2, + WMI_TLV_PEER_AUTHORIZE = 0x3, + WMI_TLV_PEER_CHAN_WIDTH = 0x4, + WMI_TLV_PEER_NSS = 0x5, + WMI_TLV_PEER_USE_4ADDR = 0x6, + WMI_TLV_PEER_MEMBERSHIP = 0x7, + WMI_TLV_PEER_USERPOS = 0x8, + WMI_TLV_PEER_CRIT_PROTO_HINT_ENABLED = 0x9, + WMI_TLV_PEER_TX_FAIL_CNT_THR = 0xa, + WMI_TLV_PEER_SET_HW_RETRY_CTS2S = 0xb, + WMI_TLV_PEER_IBSS_ATIM_WINDOW_LENGTH = 0xc, + WMI_TLV_PEER_PHYMODE = 0xd, + WMI_TLV_PEER_USE_FIXED_PWR = 0xe, + WMI_TLV_PEER_DUMMY_VAR = 0xff, +}; + enum wmi_tlv_peer_flags { WMI_TLV_PEER_AUTH = 0x00000001, WMI_TLV_PEER_QOS = 0x00000002, diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 704c71b..35f9f90 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -753,6 +753,19 @@ static struct wmi_cmd_map wmi_10_4_cmd_map = { .radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID, }; +static struct wmi_peer_param_map wmi_peer_param_map = { + .smps_state = WMI_PEER_SMPS_STATE, + .ampdu = WMI_PEER_AMPDU, + .authorize = WMI_PEER_AUTHORIZE, + .chan_width = WMI_PEER_CHAN_WIDTH, + .nss = WMI_PEER_NSS, + .use_4addr = WMI_PEER_USE_4ADDR, + .use_fixed_power = WMI_PEER_USE_FIXED_PWR, + .debug = WMI_PEER_DEBUG, + .phymode = WMI_PEER_PHYMODE, + .dummy_var = WMI_PEER_DUMMY_VAR, +}; + /* MAIN WMI VDEV param map */ static struct wmi_vdev_param_map wmi_vdev_param_map = { .rts_threshold = WMI_VDEV_PARAM_RTS_THRESHOLD, @@ -9300,6 +9313,7 @@ int ath10k_wmi_attach(struct ath10k *ar) ar->wmi.cmd = &wmi_10_4_cmd_map; ar->wmi.vdev_param = &wmi_10_4_vdev_param_map; ar->wmi.pdev_param = &wmi_10_4_pdev_param_map; + ar->wmi.peer_param = &wmi_peer_param_map; ar->wmi.peer_flags = &wmi_10_2_peer_flags_map; ar->wmi_key_cipher = wmi_key_cipher_suites; break; @@ -9308,6 +9322,7 @@ int ath10k_wmi_attach(struct ath10k *ar) ar->wmi.ops = &wmi_10_2_4_ops; ar->wmi.vdev_param = &wmi_10_2_4_vdev_param_map; ar->wmi.pdev_param = &wmi_10_2_4_pdev_param_map; + ar->wmi.peer_param = &wmi_peer_param_map; ar->wmi.peer_flags = &wmi_10_2_peer_flags_map; ar->wmi_key_cipher = wmi_key_cipher_suites; break; @@ -9316,6 +9331,7 @@ int ath10k_wmi_attach(struct ath10k *ar) ar->wmi.ops = &wmi_10_2_ops; ar->wmi.vdev_param = &wmi_10x_vdev_param_map; ar->wmi.pdev_param = &wmi_10x_pdev_param_map; + ar->wmi.peer_param = &wmi_peer_param_map; ar->wmi.peer_flags = &wmi_10_2_peer_flags_map; ar->wmi_key_cipher = wmi_key_cipher_suites; break; @@ -9324,6 +9340,7 @@ int ath10k_wmi_attach(struct ath10k *ar) ar->wmi.ops = &wmi_10_1_ops; ar->wmi.vdev_param = &wmi_10x_vdev_param_map; ar->wmi.pdev_param = &wmi_10x_pdev_param_map; + ar->wmi.peer_param = &wmi_peer_param_map; ar->wmi.peer_flags = &wmi_10x_peer_flags_map; ar->wmi_key_cipher = wmi_key_cipher_suites; break; @@ -9332,6 +9349,7 @@ int ath10k_wmi_attach(struct ath10k *ar) ar->wmi.ops = &wmi_ops; ar->wmi.vdev_param = &wmi_vdev_param_map; ar->wmi.pdev_param = &wmi_pdev_param_map; + ar->wmi.peer_param = &wmi_peer_param_map; ar->wmi.peer_flags = &wmi_peer_flags_map; ar->wmi_key_cipher = wmi_key_cipher_suites; break; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 9b5a7ec..23666ca 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -5083,6 +5083,25 @@ enum wmi_rate_preamble { /* Value to disable fixed rate setting */ #define WMI_FIXED_RATE_NONE (0xff) +struct wmi_peer_param_map { + u32 smps_state; + u32 ampdu; + u32 authorize; + u32 chan_width; + u32 nss; + u32 use_4addr; + u32 membership; + u32 use_fixed_power; + u32 user_pos; + u32 crit_proto_hint_enabled; + u32 tx_fail_cnt_thr; + u32 set_hw_retry_cts2s; + u32 ibss_atim_win_len; + u32 debug; + u32 phymode; + u32 dummy_var; +}; + struct wmi_vdev_param_map { u32 rts_threshold; u32 fragmentation_threshold; -- 2.7.4
