From: Rafał Miłecki <[email protected]> This improves handling PCIe firmware halts by printing a clear error message and replaces a similar code in the SDIO bus support.
It will also allow further improvements like trying to recover from a firmware crash. Signed-off-by: Rafał Miłecki <[email protected]> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 ++ .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 ++++++++++ .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 +- .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++-- 4 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h index 3d441c5c745c..801106583ae7 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h @@ -262,6 +262,8 @@ void brcmf_detach(struct device *dev); void brcmf_dev_reset(struct device *dev); /* Request from bus module to initiate a coredump */ void brcmf_dev_coredump(struct device *dev); +/* Indication that firmware has halted or crashed */ +void brcmf_fw_crashed(struct device *dev); /* Configure the "global" bus state used by upper layers */ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 4fbe8791f674..7f4d9356b79e 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -1273,6 +1273,16 @@ void brcmf_dev_coredump(struct device *dev) brcmf_dbg(TRACE, "failed to create coredump\n"); } +void brcmf_fw_crashed(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_pub *drvr = bus_if->drvr; + + bphy_err(drvr, "Firmware has halted or crashed\n"); + + brcmf_dev_coredump(dev); +} + void brcmf_detach(struct device *dev) { s32 i; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 39f6421885f6..cfa34672315f 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -730,7 +730,7 @@ static void brcmf_pcie_handle_mb_data(struct brcmf_pciedev_info *devinfo) } if (dtoh_mb_data & BRCMF_D2H_DEV_FWHALT) { brcmf_dbg(PCIE, "D2H_MB_DATA: FW HALT\n"); - brcmf_dev_coredump(&devinfo->pdev->dev); + brcmf_fw_crashed(&devinfo->pdev->dev); } } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 4d104ab80fd8..a06af0cd4a7f 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -1090,8 +1090,8 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) /* dongle indicates the firmware has halted/crashed */ if (hmb_data & HMB_DATA_FWHALT) { - brcmf_err("mailbox indicates firmware halted\n"); - brcmf_dev_coredump(&sdiod->func1->dev); + brcmf_dbg(SDIO, "mailbox indicates firmware halted\n"); + brcmf_fw_crashed(&sdiod->func1->dev); } /* Dongle recomposed rx frames, accept them again */ -- 2.20.1
