On Sun, 3 Mar 2019 at 20:06, Krzysiek Rosinski <[email protected]> wrote: > On Sun, Mar 3, 2019 at 10:22 AM Krzysiek Rosinski <[email protected]> > wrote: > > I'm working on a custom board with cyw4343 connected to osd3358-sm (TI > > am3358), when I load the brcmfmac driver I get 'HT Avail timeout' > > error. The same combination of driver+firmware works fine on Raspberry > > Pi Zero W. > > > > I've tried to gather as much information I can from both; the custom > > board and pi. This is available here: > > > > https://www.dropbox.com/s/vqejyrixbxx1z8d/logs.tar.gz?dl=0 > > > > I have a custom board with cyw4343 chip fitted and also flyleded > > Murata 1DX to the PocketBeagle, both give the same error code. > > > > My setup is as follows: > > > > osd335x-sm (TI am3348), cyw4343, 37.4 MHz xtal. > > Linux beaglebone 4.14.93-bone17.1 #1 PREEMPT Mon Feb 25 16:27:58 UTC > > 2019 armv7l GNU/Linux > > brcmfmac: cypress v4.14.52-backports > > brcm43430-sdio.bin: Version: 7.45.98.38 > > > > Is there something obvious which I'm doing wrong? Can you give me a > > hint on how to move with this further, please?
You have to find new enough bcmdevs.h. Try Googling BFL3_FEMCTRL_SUB and you should find many BFL3_* defines easily.
