AR9330, AR9485, AR9531, AR9550, AR9561 and AR9565 all use same
channel set register configuration which allows for small code
size reduction.

Signed-off-by: Tomislav Požega <[email protected]>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c |   24 +++---------------------
 1 files changed, 3 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c 
b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 98c5f52..daf30f9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -157,7 +157,9 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct 
ath9k_channel *chan)
        freq = centers.synth_center;
 
        if (freq < 4800) {     /* 2 GHz, fractional mode */
-               if (AR_SREV_9330(ah)) {
+               if (AR_SREV_9330(ah) || AR_SREV_9485(ah) ||
+                   AR_SREV_9531(ah) || AR_SREV_9550(ah) ||
+                   AR_SREV_9561(ah) || AR_SREV_9565(ah)) {
                        if (ah->is_clk_25mhz)
                                div = 75;
                        else
@@ -166,16 +168,6 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct 
ath9k_channel *chan)
                        channelSel = (freq * 4) / div;
                        chan_frac = (((freq * 4) % div) * 0x20000) / div;
                        channelSel = (channelSel << 17) | chan_frac;
-               } else if (AR_SREV_9485(ah) || AR_SREV_9565(ah)) {
-                       /*
-                        * freq_ref = 40 / (refdiva >> amoderefsel);
-                        * where refdiva=1 and amoderefsel=0
-                        * ndiv = ((chan_mhz * 4) / 3) / freq_ref;
-                        * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 
0x20000
-                        */
-                       channelSel = (freq * 4) / 120;
-                       chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
-                       channelSel = (channelSel << 17) | chan_frac;
                } else if (AR_SREV_9340(ah)) {
                        if (ah->is_clk_25mhz) {
                                channelSel = (freq * 2) / 75;
@@ -184,16 +176,6 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct 
ath9k_channel *chan)
                        } else {
                                channelSel = CHANSEL_2G(freq) >> 1;
                        }
-               } else if (AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
-                          AR_SREV_9561(ah)) {
-                       if (ah->is_clk_25mhz)
-                               div = 75;
-                       else
-                               div = 120;
-
-                       channelSel = (freq * 4) / div;
-                       chan_frac = (((freq * 4) % div) * 0x20000) / div;
-                       channelSel = (channelSel << 17) | chan_frac;
                } else {
                        channelSel = CHANSEL_2G(freq);
                }
-- 
1.7.0.4

Reply via email to