hi Ben, > Hello, what firmware are you using (ath10k-ct, or QCA?) If using -ct > firmware, > please try QCA firmware and let me know if that fixes the problem. > I tried both. Both have the same problem. I tried various versions of the both(-ct and QCA) firmware as well. All have the same problem.
Thanks On Mon, May 13, 2019 at 10:00 AM Ben Greear <[email protected]> wrote: > > On 5/13/19 9:56 AM, Sam Samy wrote: > > Hi, > > I installed master branch openwrt onto Asus MAP-AC2200 AP. It has tri > > band. Its based on IPQ4019 DK04 QCA reference platform. 2 radios > > (2Ghz/5Ghz) on AHB bus and one 5GHZ on PCIe bus. Its generally working > > fine except one problem in 5Ghz. On both the 5Ghz radios the RSSI is > > pretty low on any channel I put it in. In one feet range I see -60dB > > RSSI, where as the stock firmware that came with the AP gives an RSSI > > of -36dB at one foot distance.The downstream transmit rates are MCS8/9 > > for most part. The 2Ghz is working fine. Its using the cal data from > > the flash that came with the AP. > > > > Can you please suggest anyway to debug this or improve the RSSI? > > > > Thanks you! > > > > Hello, what firmware are you using (ath10k-ct, or QCA?) If using -ct > firmware, > please try QCA firmware and let me know if that fixes the problem. > > Thanks, > Ben > > -- > Ben Greear <[email protected]> > Candela Technologies Inc http://www.candelatech.com >
