On some machines mt76x0u firmware can hung during resume, what result on messages like below:
[ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: [email protected] Fixes: 134b2d0d1fcf ("mt76x0: init files") Signed-off-by: Stanislaw Gruszka <[email protected]> --- drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c index 627ed1fc7b15..645f4d15fb61 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c @@ -136,11 +136,11 @@ static int mt76x0u_start(struct ieee80211_hw *hw) .release_buffered_frames = mt76_release_buffered_frames, }; -static int mt76x0u_init_hardware(struct mt76x02_dev *dev) +static int mt76x0u_init_hardware(struct mt76x02_dev *dev, bool reset) { int err; - mt76x0_chip_onoff(dev, true, true); + mt76x0_chip_onoff(dev, true, reset); if (!mt76x02_wait_for_mac(&dev->mt76)) return -ETIMEDOUT; @@ -173,7 +173,7 @@ static int mt76x0u_register_device(struct mt76x02_dev *dev) if (err < 0) goto out_err; - err = mt76x0u_init_hardware(dev); + err = mt76x0u_init_hardware(dev, true); if (err < 0) goto out_err; @@ -309,7 +309,7 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf) if (ret < 0) goto err; - ret = mt76x0u_init_hardware(dev); + ret = mt76x0u_init_hardware(dev, false); if (ret) goto err; -- 1.9.3
