Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet")
I can observe firmware hangs on MT7630E on station mode: tx stop
functioning after minor activity (rx keep working) and on module
unload device fail to stop with messages:[ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop [ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop Loading module again results in failure to associate with AP. Only machine power off / power on cycle can make device work again. I have no idea why the commit caused F/W hangs. Most likely some proper fix is needed of changing registers programming (or assuring proper order of actions), but so far I can not came up with any better fix than a partial revert of 41634aa8d6db. Signed-off-by: Stanislaw Gruszka <[email protected]> --- drivers/net/wireless/mediatek/mt76/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c index 5397827668b9..fefe0ee52584 100644 --- a/drivers/net/wireless/mediatek/mt76/tx.c +++ b/drivers/net/wireless/mediatek/mt76/tx.c @@ -598,7 +598,7 @@ void mt76_wake_tx_queue(struct ieee80211_hw *hw, struct ieee80211_txq *txq) if (!test_bit(MT76_STATE_RUNNING, &dev->state)) return; - tasklet_schedule(&dev->tx_tasklet); + mt76_txq_schedule(dev, txq->ac); } EXPORT_SYMBOL_GPL(mt76_wake_tx_queue); -- 1.9.3
