<yhchu...@realtek.com> wrote: > From: Yan-Hsuan Chuang <yhchu...@realtek.com> > > After firmware has been downloaded, driver should send > some information to it through H2C commands. Those H2C > commands are transmitted through TX path. > > But before HCI has been started, the TX path is not > working completely. Such as PCI interfaces, the interrupts > are not enabled, hence TX interrupts will not be issued > after H2C skb has been DMAed to the device. And the H2C > skbs will not be released until the device is powered off. > > Signed-off-by: Yan-Hsuan Chuang <yhchu...@realtek.com>
Patch applied to wireless-drivers.git, thanks. 0b8dc6abbdb9 rtw88: configure firmware after HCI started -- https://patchwork.kernel.org/patch/11155999/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
