[PATCH 08/10] rtw88: pci: config phy after chip info is setup

[yhchuang]

From: Yan-Hsuan Chuang <yhchu...@realtek.com>

Chip info such as cut_version is required to configure
PCI phy. Move rtw_pci_phy_config after rtw_chip_info_setup.

Signed-off-by: Yan-Hsuan Chuang <yhchu...@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/pci.c 
b/drivers/net/wireless/realtek/rtw88/pci.c
index 772a14d851fc..17b9cdf9cb05 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -1190,8 +1190,6 @@ static int rtw_pci_setup_resource(struct rtw_dev *rtwdev, 
struct pci_dev *pdev)
                goto err_io_unmap;
        }
 
-       rtw_pci_phy_cfg(rtwdev);
-
        return 0;
 
 err_io_unmap:
@@ -1304,6 +1302,8 @@ static int rtw_pci_probe(struct pci_dev *pdev,
                goto err_destroy_pci;
        }
 
+       rtw_pci_phy_cfg(rtwdev);
+
        ret = rtw_register_hw(rtwdev, hw);
        if (ret) {
                rtw_err(rtwdev, "failed to register hw\n");
-- 
2.17.1