Since 'symbol_duration' of 'struct wpan_phy' is in nanoseconds but 'lifs_period' and 'sifs_period' are both in microseconds, fix time calculation in 'ieee802154_configure_durations()' and use convenient 'NSEC_PER_USEC' in 'ieee802154_setup_wpan_phy_pib()' as well. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <[email protected]> --- net/mac802154/main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/mac802154/main.c b/net/mac802154/main.c index 9ab7396668d2..21b7c3b280b4 100644 --- a/net/mac802154/main.c +++ b/net/mac802154/main.c @@ -161,8 +161,10 @@ void ieee802154_configure_durations(struct wpan_phy *phy, } phy->symbol_duration = duration; - phy->lifs_period = (IEEE802154_LIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC; - phy->sifs_period = (IEEE802154_SIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC; + phy->lifs_period = + (IEEE802154_LIFS_PERIOD * phy->symbol_duration) / NSEC_PER_USEC; + phy->sifs_period = + (IEEE802154_SIFS_PERIOD * phy->symbol_duration) / NSEC_PER_USEC; } EXPORT_SYMBOL(ieee802154_configure_durations); @@ -184,10 +186,10 @@ static void ieee802154_setup_wpan_phy_pib(struct wpan_phy *wpan_phy) * Should be done when all drivers sets this value. */ - wpan_phy->lifs_period = - (IEEE802154_LIFS_PERIOD * wpan_phy->symbol_duration) / 1000; - wpan_phy->sifs_period = - (IEEE802154_SIFS_PERIOD * wpan_phy->symbol_duration) / 1000; + wpan_phy->lifs_period = (IEEE802154_LIFS_PERIOD * + wpan_phy->symbol_duration) / NSEC_PER_USEC; + wpan_phy->sifs_period = (IEEE802154_SIFS_PERIOD * + wpan_phy->symbol_duration) / NSEC_PER_USEC; } int ieee802154_register_hw(struct ieee802154_hw *hw) -- 2.45.0
