On Tue, Apr 7, 2020 at 4:57 AM Kevin Hao <[email protected]> wrote: > > Hi Bruce, > > Here is another patch series for the Marvell cn96xx SoC support. The main > changes include: > - Add tuning support for HS400 mode for octeontx2 mmc > - Misc Ethernet bug fixes > - A new driver to to handle GPINT0 interrupt on Loki SoC > - RAS error-injection for octeontx2 > - Add debug interface for octeontx2 serdes > > Please merge them into the following two branches: > v5.4/standard/cn96xx > v5.4/standard/preempt-rt/cn96xx >
Thanks Kevin, This is merged. Bruce > The following changes since commit 291510e56d20516d0c6783fb3e0f2505f460af87: > > Merge branch 'v5.4/standard/base' into v5.4/standard/cn96xx (2020-04-05 > 22:13:38 -0400) > > are available in the Git repository at: > > git://github.com/haokexin/linux v5.4/standard/cn96xx > > for you to fetch changes up to 4c1e7ef371e38ab890c1d0403e052897156d0ecd: > > octeontx2-af: Disable SMQ sticky mode to avoid NIX PSE deadlock (2020-04-07 > 14:06:03 +0800) > > ---------------------------------------------------------------- > Aaron Williams (3): > octeontx2: mmc: Add tuning support for HS400 mode > mmc: octeontx2: Use flags for hardware differences > mmc: octeontx2: fix handling calibration glitch > > Chandrakala Chavva (2): > driver: mmc: octeontx2: Fix tuning for T96 C0 > driver: mmc: Configure flags for T96 pass B0 > > Geetha sowjanya (2): > octeontx2-af: Update NIX_TXSCHQ_CONFIG mbox to handle read request > octeontx2-af: Disable SMQ sticky mode to avoid NIX PSE deadlock > > Hariprasad Kelam (5): > octeontx2-af: Reset HW config done to parse switch headers in FLR > octeontx2-af: Simplify npc_set_pkind mbox handler > octeontx2-pf: Remove unnecessary mbox request in unbind > octeontx2-af: Update dmac field in vf vlan rule > octeontx2-af: Do not allow VFs to overwrite PKIND config > > Kevin Hao (1): > misc: mrvl-loki: Drop the unused variable in mrvl_loki_probe() > > Linu Cherian (1): > coresight: tmc: Force 64b DBA access when 32b pair not supported > > Michal Mazur (3): > gpio: thunderx: Configure pin function at probe > Documentation/devicetree: Describe pin-cfg option > octeontx2-af: Setup edge used for GPIO timing > > Radha Mohan Chintakuntla (1): > misc: mrvl-loki: Add driver to handle GPINT0 interrupt > > Rick Farrington (1): > edac: octeontx2: RAS error-injection > > SrujanaChalla (1): > octeontx2-af: modify default cpt limits > > Subbaraya Sundeep (1): > octeontx2-pf: Fix memory double free in otx2_aura_pool_free > > Suneel Garapati (1): > drivers: spi: octeontx2: Add fix for hw issue > > Tomasz Michalec (5): > octeontx2-serdes: Add serdes diagnostic commands > octeontx2-serdes: Implement PRBS command > octeontx2-serdes: Check SVC UUID on module init > octeontx2-serdes: Add CONFIG_OCTEONTX_SERDES > octeontx2-serdes: Add gserr and gserc eye display > > Documentation/devicetree/bindings/gpio/gpio-thunderx.txt | 4 + > drivers/gpio/gpio-thunderx.c | 29 +++++ > drivers/hwtracing/coresight/coresight-priv.h | 1 + > drivers/hwtracing/coresight/coresight-quirks.c | 4 +- > drivers/hwtracing/coresight/coresight-tmc.c | 17 ++- > drivers/hwtracing/coresight/coresight-tmc.h | 11 ++ > drivers/misc/Kconfig | 7 ++ > drivers/misc/Makefile | 1 + > drivers/misc/mrvl-loki.c | 123 > ++++++++++++++++++++ > drivers/mmc/host/cavium-octeon.c | 1 + > drivers/mmc/host/cavium-thunderx.c | 47 +++++++- > drivers/mmc/host/cavium.c | 421 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- > drivers/mmc/host/cavium.h | 55 ++++----- > drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 12 ++ > drivers/net/ethernet/marvell/octeontx2/af/cgx.h | 1 + > drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 9 +- > drivers/net/ethernet/marvell/octeontx2/af/npc.h | 1 + > drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 6 + > drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 36 ++++++ > drivers/net/ethernet/marvell/octeontx2/af/rvu_fixes.c | 12 +- > drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 54 ++++++++- > drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 43 ++++--- > drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 48 +++++++- > drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h | 1 + > drivers/net/ethernet/marvell/octeontx2/af/rvu_tim.c | 31 ++++-- > drivers/net/ethernet/marvell/octeontx2/af/rvu_validation.c | 14 ++- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c | 1 + > drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h | 3 + > drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 29 +++-- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 32 +----- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 5 +- > drivers/soc/marvell/Kconfig | 20 ++++ > drivers/soc/marvell/Makefile | 1 + > drivers/soc/marvell/octeontx2-ghes/Makefile | 3 +- > drivers/soc/marvell/octeontx2-ghes/otx2-einj.c | 166 > +++++++++++++++++++++++++++ > drivers/soc/marvell/octeontx2-serdes/Makefile | 7 ++ > drivers/soc/marvell/octeontx2-serdes/serdes_debugfs.c | 752 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/spi/spi-octeontx2.c | 19 +++- > drivers/spi/spi-octeontx2.h | 2 + > 39 files changed, 1880 insertions(+), 149 deletions(-) > create mode 100644 drivers/misc/mrvl-loki.c > create mode 100644 drivers/soc/marvell/octeontx2-ghes/otx2-einj.c > create mode 100644 drivers/soc/marvell/octeontx2-serdes/Makefile > create mode 100644 drivers/soc/marvell/octeontx2-serdes/serdes_debugfs.c > > Thanks, > Kevin -- - Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end - "Use the force Harry" - Gandalf, Star Trek II
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8588): https://lists.yoctoproject.org/g/linux-yocto/message/8588 Mute This Topic: https://lists.yoctoproject.org/mt/72846535/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
